XEP-0261: Jingle In-Band Bytestreams Transport

Copyright (c) 1999 - 2009 XMPP Standards Foundation. See Legal Notices.


This specification defines a Jingle transport method that results in sending data via the In-Band Bytestreams (IBB) protocol defined in XEP-0047. Essentially this transport method reuses XEP-0047 semantics for sending the data and defines native Jingle methods for starting and ending an IBB session.

WARNING: This Standards-Track document is Experimental. Publication as an XMPP Extension Protocol does not imply approval of this proposal by the XMPP Standards Foundation. Implementation of the protocol described herein is encouraged in exploratory implementations, but production systems should not deploy implementations of this protocol until it advances to a status of Draft.


Table of Contents


1. Introduction
2. Protocol
3. Adding a Session to a Bytestream
4. Processing Rules and Usage Guidelines
5. Security Considerations
6. IANA Considerations
7. XMPP Registrar Considerations
    7.1. Protocol Namespaces
    7.2. Protocol Versioning
    7.3. Jingle Transport Methods
8. XML Schema

Appendices
    A: Document Information
    B: Author Information
    C: Legal Notices
    D: Relation to XMPP
    E: Discussion Venue
    F: Requirements Conformance
    G: Notes
    H: Revision History


1. Introduction

Jingle [1] defines a framework for negotiating and managing data sessions over XMPP. In order to provide a flexible framework, the base Jingle specification defines neither data transport methods nor application formats, leaving that up to separate specifications. The current document defines a transport method for establishing and managing data exchanges between XMPP entities using the existing In-Band Bytestreams (IBB) protocol specified in In-Band Bytestreams [2]. This "jingle-ibb" method results in a streaming transport method suitable for use in Jingle application types where packet loss cannot be tolerated (e.g., file transfer); however, because the "jingle-ibb" transport method sends data over the XMPP channel itself (albeit not the Jingle signalling channel), it is intended as a transport of last resort when other streaming transports cannot be negotiated.

The approach taken in this specification is to use the existing IBB mechanisms described in XEP-0047 for transporting the data, and to define Jingle-specific methods only to start and end the in-band bytestream.

2. Protocol

The basic flow is as follows.

Initiator                   Responder
  |                            |
  |  session-initiate          |
  |  (with IBB info)           |
  |--------------------------->|
  |  ack                       |
  |<---------------------------|
  |  session-accept            |
  |<---------------------------|
  |  ack                       |
  |--------------------------->|
  |  IBB "SESSION"             |
  |<==========================>|
  |  session-terminate         |
  |<---------------------------|
  |  ack                       |
  |--------------------------->|
  |                            |
  

This flow is illustrated in the following examples (to prevent confusion these use a "stub" transport instead of a real application type).

First the initiator sends a Jingle session-initiate request.

Example 1. Initiator sends session-initiate (stub)

<iq from='romeo@montague.lit/orchard'
    id='xn28s7gk'
    to='juliet@capulet.lit/balcony'
    type='set'>
  <jingle xmlns='urn:xmpp:jingle:0'>
          action='session-initiate'
          initiator='romeo@montague.lit/orchard'
          sid='a73sjjvkla37jfea'>
    <content creator='initiator' name='stub'>
      <description xmlns='urn:xmpp:jingle:apps:stub:0'/>
      <transport xmlns='urn:xmpp:jingle:transports:ibb:0'
                 block-size='4096'
                 sid='ch3d9s71'/>
    </content>
  </jingle>
</iq>
  

Note: The Jingle IBB Transport Method defines one attribute in addition to those defined in XEP-0047: the 'stanza' attribute. This attribute specifies whether the initiator intends to send IBB data using <message/> or <iq/> stanzas, but is purely advisory. The default value is "iq", and it is RECOMMENDED to send IBB data using IQ stanzas instead of message stanzas because IQ stanzas provide feedback to the sender regarding delivery to the recipient (e.g., if the recipient is on a small pipe and cannot handle a large volume of IBB packets in quick succession).

The responder immediately acknowledges receipt (but does not yet accept the session).

Example 2. Responder acknowledges session-initiate

<iq from='juliet@capulet.lit/balcony'
    id='xn28s7gk'
    to='romeo@montague.lit/orchard'
    type='result'/>
  

If the offer is acceptable, the responder returns a Jingle session-accept and the initiator acknowledges the session-accept.

Example 3. Responder definitively accepts the session

<iq from='juliet@capulet.lit/balcony'
    id='bsa91h5'
    to='romeo@montague.lit/orchard'
    type='set'>
  <jingle xmlns='urn:xmpp:jingle:0'
          action='session-accept'
          initiator='romeo@montague.lit/orchard'
          responder='juliet@capulet.lit/balcony'
          sid='a73sjjvkla37jfea'>
    <content creator='initiator' name='stub'>
      <description xmlns='urn:xmpp:jingle:apps:stub:0'/>
      <transport xmlns='urn:xmpp:jingle:transports:ibb:0'
                 block-size='4096'
                 sid='ch3d9s71'/>
    </content>
  </jingle>
</iq>
  

Example 4. Initiator acknowledges session-accept

<iq from='romeo@montague.lit/orchard'
    id='bsa91h5'
    to='juliet@capulet.lit/balcony'
    type='result'/>
  

The initiator then immediately begins sending IBB packets using an IQ-set for each chunk as described in XEP-0047, and the responder acknowledges each IQ-set.

Example 5. An IBB packet

<iq from='romeo@montague.net/orchard' 
    id='ls72b58f'
    to='juliet@capulet.com/balcony' 
    type='set'>
  <data xmlns='http://jabber.org/protocol/ibb' seq='0' sid='ch3d9s71'>
    qANQR1DBwU4DX7jmYZnncmUQB/9KuKBddzQH+tZ1ZywKK0yHKnq57kWq+RFtQdCJ
    WpdWpR0uQsuJe7+vh3NWn59/gTc5MDlX8dS9p0ovStmNcyLhxVgmqS8ZKhsblVeu
    IpQ0JgavABqibJolc3BKrVtVV1igKiX/N7Pi8RtY1K18toaMDhdEfhBRzO/XB0+P
    AQhYlRjNacGcslkhXqNjK5Va4tuOAPy2n1Q8UUrHbUd0g+xJ9Bm0G0LZXyvCWyKH
    kuNEHFQiLuCY6Iv0myq6iX6tjuHehZlFSh80b5BVV9tNLwNR5Eqz1klxMhoghJOA
  </data>
</iq>
  

Example 6. An IBB ack

<iq from='juliet@capulet.com/balcony' 
    id='ls72b58f'
    to='romeo@montague.net/orchard' 
    type='result'/>
  

Once the parties have finished using the bytestream (e.g., because a complete file has been sent), either party can send a Jingle session-terminate action.

Example 7. Initiator terminates the session

<iq from='romeo@montague.lit/orchard'
    id='hz81vf48'
    to='juliet@capulet.lit/balcony'
    type='set'>
  <jingle xmlns='urn:xmpp:jingle:0'
          action='session-terminate'
          initiator='romeo@montague.lit/orchard'
          sid='a73sjjvkla37jfea'>
    <reason><success/></reason>
  </jingle>
</iq>
  

The other party then acknowledges the session-terminate and the Jingle session is finished.

Example 8. Responder acknowledges session-terminate

<iq from='juliet@capulet.lit/balcony'
    id='hz81vf48'
    to='romeo@montague.lit/orchard'
    type='result'/>
  

3. Adding a Session to a Bytestream

As IBB is defined in XEP-0047, there is one session per bytestream (which can be used in both directions). To extend this idea, it might be useful to run multiple sessions over a single bytestream. This can be done by sending a transport-info message that authorizes an additional session, as shown in the following example.

Example 9. Initiator adds a session

<iq from='romeo@montague.lit/orchard'
    id='znb376s4'
    to='juliet@capulet.lit/balcony'
    type='set'>
  <jingle xmlns='urn:xmpp:jingle:0'>
          action='transport-info'
          initiator='romeo@montague.lit/orchard'
          sid='a73sjjvkla37jfea'>
    <content creator='initiator' name='stub'>
      <transport xmlns='urn:xmpp:jingle:transports:ibb:0'
                 block-size='4096'
                 sid='bt8a71h6'/>
    </content>
  </jingle>
</iq>
  

Here the Jingle Session ID is the same ("a73sjjvkla37jfea") but the new IBB Session ID ("bt8a71h6") is different from the old IBB Session ID that is already in use ("ch3d9s71").

4. Processing Rules and Usage Guidelines

The same processing rules and usage guidelines defined in XEP-0047 apply to the Jingle IBB Transport Method.

5. Security Considerations

The same security considerations defined in XEP-0047 apply to the Jingle IBB Transport Method.

6. IANA Considerations

This document requires no interaction with the Internet Assigned Numbers Authority (IANA) [3].

7. XMPP Registrar Considerations

7.1 Protocol Namespaces

This specification defines the following XML namespace:

Upon advancement of this specification from a status of Experimental to a status of Draft, the XMPP Registrar [4] shall add the foregoing namespace to the registry located at <http://xmpp.org/registrar/namespaces.html>, as described in Section 4 of XMPP Registrar Function [5].

7.2 Protocol Versioning

If the protocol defined in this specification undergoes a revision that is not fully backwards-compatible with an older version, the XMPP Registrar shall increment the protocol version number found at the end of the XML namespaces defined herein, as described in Section 4 of XEP-0053.

7.3 Jingle Transport Methods

The XMPP Registrar shall add to its registry of Jingle transport methods a definition for the "jingle-ibb" transport method. The registry submission is as follows:

<transport>
  <name>ibb</name>
  <desc>A method for exchanging data over In-Band Bytestreams.</desc>
  <type>streaming</type>
  <doc>XEP-0261</doc>
</transport>
    

8. XML Schema

<?xml version='1.0' encoding='UTF-8'?>

<xs:schema
    xmlns:xs='http://www.w3.org/2001/XMLSchema'
    targetNamespace='urn:xmpp:jingle:transports:ibb:0'
    xmlns='urn:xmpp:jingle:transports:ibb:0'
    elementFormDefault='qualified'>

   <xs:element name='transport'>
     <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='block-size' type='xs:short' use='required'/>
          <xs:attribute name='sid' type='xs:string' use='required'/>
          <xs:attribute name='stanza' use='optional' default='iq'>
            <xs:simpleType>
              <xs:restriction base='xs:NCName'>
                <xs:enumeration value='iq'>
                <xs:enumeration value='message'/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:extension>
      </xs:simpleContent>
     </xs:complexType>
   </xs:element>

  <xs:simpleType name='empty'>
    <xs:restriction base='xs:string'>
      <xs:enumeration value=''/>
    </xs:restriction>
  </xs:simpleType>

</xs:schema>
  

Appendices


Appendix A: Document Information

Series: XEP
Number: 0261
Publisher: XMPP Standards Foundation
Status: Experimental
Type: Standards Track
Version: 0.1
Last Updated: 2009-02-19
Approving Body: XMPP Council
Dependencies: XMPP Core, XEP-0047
Supersedes: None
Superseded By: None
Short Name: jingle-ibb
Source Control: HTML  RSS


Appendix B: Author Information

Peter Saint-Andre

JabberID: stpeter@jabber.org
URI: https://stpeter.im/


Appendix C: Legal Notices

Copyright

This XMPP Extension Protocol is copyright (c) 1999 - 2009 by the XMPP Standards Foundation (XSF).

Permissions

Permission is hereby granted, free of charge, to any person obtaining a copy of this specification (the "Specification"), to make use of the Specification without restriction, including without limitation the rights to implement the Specification in a software program, deploy the Specification in a network service, and copy, modify, merge, publish, translate, distribute, sublicense, or sell copies of the Specification, and to permit persons to whom the Specification is furnished to do so, subject to the condition that the foregoing copyright notice and this permission notice shall be included in all copies or substantial portions of the Specification. Unless separate permission is granted, modified works that are redistributed shall not contain misleading information regarding the authors, title, number, or publisher of the Specification, and shall not claim endorsement of the modified works by the authors, any organization or project to which the authors belong, or the XMPP Standards Foundation.

Disclaimer of Warranty

## NOTE WELL: This Specification is provided on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. In no event shall the XMPP Standards Foundation or the authors of this Specification be liable for any claim, damages, or other liability, whether in an action of contract, tort, or otherwise, arising from, out of, or in connection with the Specification or the implementation, deployment, or other use of the Specification. ##

Limitation of Liability

In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall the XMPP Standards Foundation or any author of this Specification be liable for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising out of the use or inability to use the Specification (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if the XMPP Standards Foundation or such author has been advised of the possibility of such damages.

IPR Conformance

This XMPP Extension Protocol has been contributed in full conformance with the XSF's Intellectual Property Rights Policy (a copy of which may be found at <http://xmpp.org/extensions/ipr-policy.shtml> or obtained by writing to XSF, P.O. Box 1641, Denver, CO 80201 USA).

Appendix D: Relation to XMPP

The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 3920) and XMPP IM (RFC 3921) specifications contributed by the XMPP Standards Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this document has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.


Appendix E: Discussion Venue

There exists a special venue for discussion related to the technology described in this document: the <jingle@xmpp.org> mailing list.

The primary venue for discussion of XMPP Extension Protocols is the <standards@xmpp.org> discussion list.

Discussion on other xmpp.org discussion lists might also be appropriate; see <http://xmpp.org/about/discuss.shtml> for a complete list.

Errata may be sent to <editor@xmpp.org>.


Appendix F: Requirements Conformance

The following requirements keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".


Appendix G: Notes

1. XEP-0166: Jingle <http://xmpp.org/extensions/xep-0166.html>.

2. XEP-0047: In-Band Bytestreams <http://xmpp.org/extensions/xep-0047.html>.

3. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols, such as port numbers and URI schemes. For further information, see <http://www.iana.org/>.

4. The XMPP Registrar maintains a list of reserved protocol namespaces as well as registries of parameters used in the context of XMPP extension protocols approved by the XMPP Standards Foundation. For further information, see <http://xmpp.org/registrar/>.

5. XEP-0053: XMPP Registrar Function <http://xmpp.org/extensions/xep-0053.html>.


Appendix H: Revision History

Version 0.1 (2009-02-19)

Initial published version.

(psa)

Version 0.0.2 (2009-02-11)

Defined ability to add more session IDs to a bytestream using Jingle transport-info. (psa)

Version 0.0.1 (2009-02-10)

Rough draft. (psa)

END