XEP-0363: HTTP File Upload

Abstract:This specification defines a protocol to request permissions from another entity to upload a file to a specific path on an HTTP server and at the same time receive a URL from which that file can later be downloaded again.
Author:Daniel Gultsch
Copyright:© 1999 - 2016 XMPP Standards Foundation. SEE LEGAL NOTICES.
Status:Experimental
Type:Standards Track
Version:0.2.5
Last Updated:2017-01-08

WARNING: This Standards-Track document is Experimental. Publication as an XMPP Extension Protocol does not imply approval of this proposal by the XMPP Standards Foundation. Implementation of the protocol described herein is encouraged in exploratory implementations, but production systems are advised to carefully consider whether it is appropriate to deploy implementations of this protocol before it advances to a status of Draft.


Table of Contents


1. Introduction
2. Requirements
3. Discovering Support
4. Requesting a slot
5. Error conditions
6. Upload
7. Implementation Notes
8. Security Considerations
9. IANA Considerations
10. XMPP Registrar Considerations
    10.1. Protocol Namespaces
11. XML Schema

Appendices
    A: Document Information
    B: Author Information
    C: Legal Notices
    D: Relation to XMPP
    E: Discussion Venue
    F: Requirements Conformance
    G: Notes
    H: Revision History


1. Introduction

XMPP protocol extensions already define methods for peer-to-peer file transfer such as SI File Transfer (XEP-0096) [2] or Jingle File Transfer (XEP-0234) [3] however due to their very nature of being peer-to-peer they don't work very well in scenarios where it is requeried to send a file to multiple recipients or multiple resources of the same recipient at once. They also don’t work alongside offline storage, MUC history and Message Archive Management (XEP-0313) [4].

Uploading files manually to an HTTP server and sharing the link has been a workaround for this for a long time now. While users have a variety of services to choose from the downside of this manual approach is that an XMPP client can not automate this process on behalf of the user since these services don’t share a common API. Furthermore using a third party service would probably require the user to enter additional credentials into their XMPP client specifically for the file upload.

This XEP defines an approach to request permissions from another entity to upload a file to a specific path on an HTTP server and at the same time receive an URL from which that file can later be downloaded again. These tuples consisting of a PUT and a GET-URL are called slots.

2. Requirements

3. Discovering Support

An entity advertises support for this protocol by including the "urn:xmpp:http:upload" in its service discovery information features as specified in Service Discovery (XEP-0030) [7] or section 6.3 of Entity Capabilities (XEP-0115) [8]. To avoid unnecessary round trips an entity SHOULD also include the maximum file size as specified in Service Discovery Extensions (XEP-0128) [9] if such a limitation exists. The field name MUST be "max-file-size" and the value MUST be in bytes.

A user's server SHOULD include any known entities that provide such services into its service discovery items.

Example 1. Client sends service discovery request to server

<iq from='romeo@montague.tld/garden'
    id='step_01'
    to='montague.tld'
    type='get'>
  <query xmlns='http://jabber.org/protocol/disco#items'/>
</iq>

Example 2. Server replies to service discovery request

<iq from='montague.tld'
    id='step_01'
    to='romeo@montague.tld/garden'
    type='result'>
  <query xmlns='http://jabber.org/protocol/disco#items'>
    <item jid='upload.montague.tld' name='HTTP File Upload' />
    <item jid='conference.montague.tld' name='Chatroom Service' />
  </query>
</iq>

Example 3. Client sends service discovery request to upload service

<iq from='romeo@montague.tld/garden'
    id='step_02'
    to='upload.montague.tld'
    type='get'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>

Example 4. Upload service replies to service discovery request and reports a maximum file size of 5MiB

<iq from='upload.montague.tld'
    id='step_02'
    to='romeo@montague.tld/garden'
    type='result'>
  <query xmlns='http://jabber.org/protocol/disco#info'>
    <identity category='store'
              type='file'
              name='HTTP File Upload' />
    <feature var='urn:xmpp:http:upload' />
    <x type='result' xmlns='jabber:x:data'>
      <field var='FORM_TYPE' type='hidden'>
        <value>urn:xmpp:http:upload</value>
      </field>
      <field var='max-file-size'>
        <value>5242880</value>
      </field>
    </x>
  </query>
</iq>

4. Requesting a slot

A client requests a new upload slot by sending an IQ-get to the upload service containing a <request> child element qualified by the urn:xmpp:http:upload namespace. This element MUST include elements <filename> and <size> containing the file name and size respectively.

An additional element <content-type> containing the Content-Type is OPTIONAL.

Example 5. Client requests a slot on the upload service

<iq from='romeo@montague.tld/garden'
    id='step_03'
    to='upload.montague.tld'
    type='get'>
  <request xmlns='urn:xmpp:http:upload'>
    <filename>my_juliet.png</filename>
    <size>23456</size>
    <content-type>image/jpeg</content-type>
  </request>
</iq>

The upload service responds with both a PUT and a GET URL wrapped by a <slot> element. The service SHOULD keep the file name and especially the file ending intact. Using the same hostname for PUT and GET is OPTIONAL. The host SHOULD provide Transport Layer Security (RFC 5246 [10]).

Example 6. The upload service responds with a slot

<iq from='upload.montague.tld'
    id='step_03'
    to='romeo@montague.tld/garden'
    type='result'>
  <slot xmlns='urn:xmpp:http:upload'>
    <put>https://upload.montague.tld/4a771ac1-f0b2-4a4a-9700-f2a26fa2bb67/my_juliet.png</put>
    <get>https://download.montague.tld/4a771ac1-f0b2-4a4a-9700-f2a26fa2bb67/my_juliet.png</get>
  </slot>
</iq>

5. Error conditions

Instead of providing the client with a slot the service MAY respond with an error if the requested file size is too large.

Example 7. Alternative response by the upload service if the file size was too large

<iq from='upload.montague.tld'
    id='step_03'
    to='romeo@montague.tld/garden'
    type='error'>
  <request xmlns='urn:xmpp:http:upload'>
    <filename>my_juliet.png</filename>
    <size>23456</size>
  </request>
  <error type='modify'>
    <not-acceptable xmlns='urn:ietf:params:xml:ns:xmpp-stanzas' />
    <text xmlns='urn:ietf:params:xml:ns:xmpp-stanzas>File too large. The maximum file size is 20000 bytes</text>
    <file-too-large xmlns='urn:xmpp:http:upload'>
      <max-file-size>20000</max-file-size>
    </file-too-large>
  </error>
</iq>

For any other type of error the service SHOULD respond with appropriate error types to indicate temporary or permanent errors.

Example 8. Alternative response by the upload service to indicate a temporary error after the client exceeded a quota

<iq from='upload.montague.tld'
    id='step_03'
    to='romeo@montague.tld/garden'
    type='error'>
  <request xmlns='urn:xmpp:http:upload'>
    <filename>my_juliet.png</filename>
    <size>23456</size>
  </request>
  <error type='wait'>
    <resource-constraint xmlns='urn:ietf:params:xml:ns:xmpp-stanzas' />
    <text xmlns='urn:ietf:params:xml:ns:xmpp-stanzas>Quota reached. You can only upload 5 files in 5 minutes</text>
  </error>
</iq>

Example 9. Alternative response by the upload service to indicate a permanent error to a client that is not allowed to upload files

<iq from='upload.montague.tld'
    id='step_03'
    to='romeo@montague.tld/garden'
    type='error'>
  <request xmlns='urn:xmpp:http:upload'>
    <filename>my_juliet.png</filename>
    <size>23456</size>
  </request>
  <error type='cancel'>
    <not-allowed xmlns='urn:ietf:params:xml:ns:xmpp-stanzas' />
    <text xmlns='urn:ietf:params:xml:ns:xmpp-stanzas>Only premium members are allowed to upload files</text>
  </error>
</iq>

6. Upload

The actual upload of the file happens via HTTP-PUT and is out of scope of this document. The upload service MUST reject the file upload if the Content-Length does not match the size of the slot request. The service SHOULD reject the file if the Content-Type has been specified beforehand and does not match. The service MAY assume application/octet-stream as a Content-Type if it the client did not specify a Content-Type at all.

There is no further XMPP communication required between the upload service and the client. A HTTP status Code of 201 means that the server is now ready to serve the file via the provided GET URL. If the upload fails for whatever reasons the client MAY request a new slot.

7. Implementation Notes

The upload service SHOULD choose an appropriate timeout for the validity of the PUT URL. Since there is no reason for a client to wait between requesting the slot and starting the upload, relatively low timeout values of around 60s are RECOMMENDED.

It is RECOMMENDED that the service stores the files for as long as possible which is of course limited by storage capacity. A service MAY choose to store the latest x MiB of a given user.

8. Security Considerations

9. IANA Considerations

This document requires no interaction with the Internet Assigned Numbers Authority (IANA).

10. XMPP Registrar Considerations

10.1 Protocol Namespaces

This specification defines the following XML namespace:

Upon advancement of this specification from a status of Experimental to a status of Draft, the XMPP Registrar [11] shall add the foregoing namespace to the registry located at <http://xmpp.org/registrar/namespaces.html>, as described in Section 4 of XMPP Registrar Function (XEP-0053) [12].

11. XML Schema

tbd


Appendices


Appendix A: Document Information

Series: XEP
Number: 0363
Publisher: XMPP Standards Foundation
Status: Experimental
Type: Standards Track
Version: 0.2.5
Last Updated: 2017-01-08
Approving Body: XMPP Council
Dependencies: XMPP Core, XEP-0030, XEP-0128
Supersedes: None
Superseded By: None
Short Name: NOT_YET_ASSIGNED
Source Control: HTML
This document in other formats: XML  PDF


Appendix B: Author Information

Daniel Gultsch

Email: daniel@gultsch.de
JabberID: daniel@gultsch.de


Appendix C: Legal Notices

Copyright

This XMPP Extension Protocol is copyright © 1999 - 2016 by the XMPP Standards Foundation (XSF).

Permissions

Permission is hereby granted, free of charge, to any person obtaining a copy of this specification (the "Specification"), to make use of the Specification without restriction, including without limitation the rights to implement the Specification in a software program, deploy the Specification in a network service, and copy, modify, merge, publish, translate, distribute, sublicense, or sell copies of the Specification, and to permit persons to whom the Specification is furnished to do so, subject to the condition that the foregoing copyright notice and this permission notice shall be included in all copies or substantial portions of the Specification. Unless separate permission is granted, modified works that are redistributed shall not contain misleading information regarding the authors, title, number, or publisher of the Specification, and shall not claim endorsement of the modified works by the authors, any organization or project to which the authors belong, or the XMPP Standards Foundation.

Disclaimer of Warranty

## NOTE WELL: This Specification is provided on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. ##

Limitation of Liability

In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall the XMPP Standards Foundation or any author of this Specification be liable for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising from, out of, or in connection with the Specification or the implementation, deployment, or other use of the Specification (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if the XMPP Standards Foundation or such author has been advised of the possibility of such damages.

IPR Conformance

This XMPP Extension Protocol has been contributed in full conformance with the XSF's Intellectual Property Rights Policy (a copy of which can be found at <http://xmpp.org/about-xmpp/xsf/xsf-ipr-policy/> or obtained by writing to XMPP Standards Foundation, P.O. Box 787, Parker, CO 80134 USA).

Appendix D: Relation to XMPP

The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 6120) and XMPP IM (RFC 6121) specifications contributed by the XMPP Standards Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this document has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.


Appendix E: Discussion Venue

The primary venue for discussion of XMPP Extension Protocols is the <standards@xmpp.org> discussion list.

Discussion on other xmpp.org discussion lists might also be appropriate; see <http://xmpp.org/about/discuss.shtml> for a complete list.

Errata can be sent to <editor@xmpp.org>.


Appendix F: Requirements Conformance

The following requirements keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".


Appendix G: Notes

1. XEP-0128: Service Discovery Extensions <http://xmpp.org/extensions/xep-0128.html>.

2. XEP-0096: SI File Transfer <http://xmpp.org/extensions/xep-0096.html>.

3. XEP-0234: Jingle File Transfer <http://xmpp.org/extensions/xep-0234.html>.

4. XEP-0313: Message Archive Management <http://xmpp.org/extensions/xep-0313.html>.

5. XEP-0066: Out of Band Data <http://xmpp.org/extensions/xep-0066.html>.

6. XEP-0084: User Avatar <http://xmpp.org/extensions/xep-0084.html>.

7. XEP-0030: Service Discovery <http://xmpp.org/extensions/xep-0030.html>.

8. XEP-0115: Entity Capabilities <http://xmpp.org/extensions/xep-0115.html>.

9. XEP-0128: Service Discovery Extensions <http://xmpp.org/extensions/xep-0128.html>.

10. RFC 5246: The Transport Layer Security (TLS) Protocol Version 1.2 <http://tools.ietf.org/html/rfc5246>.

11. The XMPP Registrar maintains a list of reserved protocol namespaces as well as registries of parameters used in the context of XMPP extension protocols approved by the XMPP Standards Foundation. For further information, see <http://xmpp.org/registrar/>.

12. XEP-0053: XMPP Registrar Function <http://xmpp.org/extensions/xep-0053.html>.


Appendix H: Revision History

Note: Older versions of this specification might be available at http://xmpp.org/extensions/attic/

Version 0.2.5 (2017-01-08)

Merge typo fixes suggested by an unnamed user.

(XEP Editor: ssw)

Version 0.2.4 (2016-10-28)

Fix TLS reference

(dg (XEP Editor: ssw))

Version 0.2.3 (2016-07-11)

Typo fixes

(wjt (XEP Editor: ssw))

Version 0.2.2 (2016-03-30)

Typo fix

(ssw)

Version 0.2.1 (2016-03-16)

Minor dependency and citation fixes (fs).

(XEP Editor (ssw))

Version 0.2 (2016-03-07)

Announce maximum file size by means of Service Discovery Extensions (XEP-0128) [1]

(dg)

Version 0.1.2 (2016-02-16)

Fix typo of discovery (Philipp Hancke).

(XEP Editor (mam))

Version 0.1.1 (2016-01-05)

Fix invalid XML in examples (tpa).

(XEP Editor (ssw))

Version 0.1 (2015-08-27)

Initial published version approved by the XMPP Council.

(XEP Editor (mam))

Version 0.0.1 (2015-07-25)

First draft.

(dg)

END