JEP-0059: Result Set Management

This document defines an XMPP protocol extension to enable entities to page through and otherwise manage the receipt of large result sets.

NOTICE: This JEP is currently within Last Call or under consideration by the Jabber Council for advancement to the next stage in the JSF standards process.

JEP Information

Status: Proposed
Type: Standards Track
Number: 0059
Version: 0.13
Last Updated: 2006-09-07
JIG: Standards JIG
Approving Body: Jabber Council
Dependencies: None
Supersedes: None
Superseded By: None
Short Name: rsm
Wiki Page: <http://wiki.jabber.org/index.php/Result Set Management (JEP-0059)>

Author Information

Peter Saint-Andre

Email: stpeter@jabber.org
JID: stpeter@jabber.org

Ian Paterson

Email: ian.paterson@clientside.co.uk
JID: ian@zoofy.com

Valerie Mercier

Email: valerie.mercier@francetelecom.com
JID: vmercier@jabber.com

Jean-Louis Seguineau

Email: jls@antepo.com
JID: jlseguineau@im.antepo.com

Legal Notice

This Jabber Enhancement Proposal is copyright 1999 - 2006 by the Jabber Software Foundation (JSF) and is in full conformance with the JSF's Intellectual Property Rights Policy <http://www.jabber.org/jsf/ipr-policy.shtml>. This material may be distributed only subject to the terms and conditions set forth in the Creative Commons Attribution License (<http://creativecommons.org/licenses/by/2.5/>).

Discussion Venue

The preferred venue for discussion of this document is the Standards-JIG discussion list: <http://mail.jabber.org/mailman/listinfo/standards-jig>.

Relation to XMPP

The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 3920) and XMPP IM (RFC 3921) specifications contributed by the Jabber Software Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this JEP has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.

Conformance Terms

The following keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".

Table of Contents

1. Introduction
2. Use Cases
2.1. Limiting the Size of a Result Set
2.2. Paging Forwards Through a Result Set
2.3. Paging Backwards Through a Result Set
2.4. Page Not Found
2.5. Requesting the Last Page in a Result Set
2.6. Retrieving a Page Out of Order
2.7. Getting the Item Count
3. Examples
4. Determining Support
5. Security Considerations
6. IANA Considerations
7. Jabber Registrar Considerations
7.1. Protocol Namespaces
8. XML Schema
9. Acknowledgements
Notes
Revision History

1. Introduction

In Jabber Search [1], Service Discovery [2], Publish-Subscribe [3], Message Archiving [4], and perhaps other future XMPP extensions, it is possible to receive large result sets in response to information requests (e.g., a user directory search on a common first name or a service discovery items request sent to a Multi-User Chat [5] service). Thus it would be helpful to define an XMPP protocol extension that enables the following functionality:

  1. Discover the size of a potential result set without retrieving the items themselves.
  2. Limit the size of a result set.
  3. Page through a result set by retrieving the items in smaller subsets.

This document defines just such a protocol extension.

2. Use Cases

2.1 Limiting the Size of a Result Set

In order to limit the number of items to be returned in a result set, the requesting entity specifies a request type of "set" and the maximum size of the desired result set (via the XML character data of the <max/> element):

Example 1. Requesting a Limit to the Result Set

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='limit1'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
    </set>
  </query>
</iq>

The responding entity then returns a result set limited to the requested size:

Example 2. Returning a Limited Result Set

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='limit1'>
  <query xmlns='jabber:iq:search'>
    <item jid='stpeter@jabber.org'>
      <first>Peter</first>
      <last>Saint-Andre</last>
      <nick>Pete</nick>
    </item>
    .
    [8 more items]
    .
    <item jid='peterpan@neverland.lit'>
      <first>Peter</first>
      <last>Pan</last>
      <nick>Pete</nick>
    </item>
  </query>
</iq>

2.2 Paging Forwards Through a Result Set

The set of items that match a query MAY change over time, even during the time that a requesting entity pages through a result set (e.g., a set of chatrooms, since rooms can be created and destroyed at any time). The paging protocol outlined in this section is designed to make the following features possible:

Note: If a responding entity implements dynamic result sets then receiving entities paging through the complete result set should be aware that it may not correspond to the result set as it existed at any one point in time.

The request for the first page is the same as when Limiting the Size of a Result Set:

Example 3. Requesting the First Page of a Result Set

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='page1'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
    </set>
  </query>
</iq>

Responding entity support for paging through a result set is optional. If it does support paging (not just Limiting the Size of a Result Set), then in each result set it returns, the responding entity MUST include <first/> and <last/> elements that specify the unique ID (UID) for the first and last items in the page. If there is only one item in the page, then the first and last UIDs MUST be the same. If there are no items in the page, then the <first/> and <last/> elements MUST NOT be included.

The responding entity may generate these UIDs in any way, as long as the UIDs are unique in the context of all possible members of the full result set. Each UID MAY be based on part of the content of its associated item, as shown below, or on an internal table index. Another possible method is to serialize the XML of the item and then hash it to generate the UID. Note: The requesting entity MUST treat all UIDs as opaque.

The responding entity SHOULD also include the number of items in the full set (which MAY be approximate) encapsulated in a <count/> element. The <first/> element SHOULD include an 'index' attribute. This integer specifies the position within the full set (which MAY be approximate) of the first item in the page. If that item is the first in the full set, then the index MUST be '0'. If the last item in the page is the last item in the full set, then the value of the <first/> element's 'index' attribute MUST be the specified count minus the number of items in the last page.

Note: The <count/> element and 'index' attribute enable important functionality for requesting entities (for example, a scroll-bar user-interface component). They MAY be omitted, but only if it would be either impossible or exceptionally resource intensive to calculate reasonably accurate values.

Example 4. Returning the First Page of a Result Set

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='page1'>
  <query xmlns='jabber:iq:search'>
    <item jid='stpeter@jabber.org'>
      <first>Peter</first>
      <last>Saint-Andre</last>
      <nick>Pete</nick>
    </item>
    .
    [8 more items]
    .
    <item jid='peterpan@neverland.lit'>
      <first>Peter</first>
      <last>Pan</last>
      <nick>Pete</nick>
    </item>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <first index='0'>stpeter@jabber.org</first>
      <last>peterpan@neverland.lit</last>
      <count>800</count>
    </set>
  </query>
</iq>

The requesting entity can then ask for the next page in the result set by including in its request the UID of the last item from the previous page (encapsulated in an <after/> element), along with the maximum number of items to return. Note: If no <after/> element is specified, then the UID defaults to "before the first item in the result set" (i.e., effectively an index of negative one).

Example 5. Requesting the Second Page of a Result Set

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='page2'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
      <after>peterpan@neverland.lit</after>
    </set>
  </query>
</iq>

The first item in the page returned by the responding entity MUST be the item that immediately follows the item that the requesting entity indicated in the <after/> element:

Example 6. Returning the Second Page of a Result Set

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='page2'>
  <query xmlns='jabber:iq:search'>
    <item jid='peter@pixyland.org'>
      <first>Peter</first>
      <last>Pan</last>
      <nick>Pete</nick>
    </item>
    .
    [8 more items]
    .
    <item jid='peter@rabbit.lit'>
      <first>Peter</first>
      <last>Rabbit</last>
      <nick>Pete</nick>
    </item>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <first index='10'>peter@pixyland.org</first>
      <last>peter@rabbit.lit</last>
      <count>800</count>
    </set>
  </query>
</iq>

It may sometimes be necessary to return an empty page to the requesting entity. For example, with dynamic result sets the responding entity MAY delete some items from the full result set between requests. Another example occurs when the requesting entity specifies "0" for the maximum number items to return (see Getting the Item Count).

Example 7. Returning an Empty Page

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='page80'>
  <query xmlns='jabber:iq:search'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <count>790</count>
    </set>
  </query>
</iq>

If there are no items whatsoever in the full result set, the responding entity MUST return a response that adheres to the definition of the wrapper protocol (e.g., "jabber:iq:search", "http://jabber.org/protocol/disco#items", or "http://jabber.org/protocol/pubsub"). For both JEP-0055 and JEP-0030, that means the responding entity shall return an empty <query/> element; for JEP-0060, that means the responding entity shall return an empty <pubsub/> element; for JEP-0136, that means the responding entity shall return an empty <list/> or <store/> element.

2.3 Paging Backwards Through a Result Set

The requesting entity MAY ask for the previous page in a result set by including in its request the UID of the first item from the page that has already been received (encapsulated in a <before/> element), along with the maximum number of items to return.

Example 8. Requesting the Previous Page of a Result Set

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='back1'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
      <before>peter@pixyland.org</before>
    </set>
  </query>
</iq>

The last item in the page returned by the responding entity MUST be the item that immediately preceeds the item that the requesting entity indicated it has already received:

Example 9. Returning the Previous Page of a Result Set

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='back1'>
  <query xmlns='jabber:iq:search'>
    <item jid='stpeter@jabber.org'>
      <first>Peter</first>
      <last>Saint-Andre</last>
      <nick>Pete</nick>
    </item>
    .
    [8 more items]
    .
    <item jid='peterpan@neverland.lit'>
      <first>Peter</first>
      <last>Pan</last>
      <nick>Pete</nick>
    </item>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <first index='0'>stpeter@jabber.org</first>
      <last>peterpan@neverland.lit</last>
      <count>800</count>
    </set>
  </query>
</iq>

2.4 Page Not Found

The responding entity MUST reply with an 'item-not-found' error if all the following circumstances apply:

  1. The item specified by the requesting entity via the UID in the <after/> or <before/> element no longer exists (it was deleted after the previous page was sent).

  2. The UID itself cannot be used to derive directly the next item within the set (e.g. the alphabetical or numerical order of the UIDs do not specify the order of the items).

  3. The responding entity does not remember the position of the deleted item within the full list. (Even if the responding entity bothers to remember the position of each deleted item, it will typically be necessary to expire that 'state' after an implementation-specific period of time.)

Example 10. Returning a Page-Not-Found Error

<iq type='error' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='page2'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
      <after>peterpan@neverland.lit</after>
    </set>
  </query>
  <error type='cancel'>
    <item-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

2.5 Requesting the Last Page in a Result Set

The requesting entity MAY ask for the last page in a result set by including in its request an empty <before/> element, and the maximum number of items to return.

Example 11. Requesting the Last Page of a Result Set

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='page1'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
      <before/>
    </set>
  </query>
</iq>

2.6 Retrieving a Page Out of Order

The requesting entity MAY choose not to retrieve pages from the result set in order. (For example, when its user drags the user interface slider to a radically new position within a very large result set.)

Only if the UID before the start (or after the end) of a desired result set page is not known, then the requesting entity MAY request the page that starts at a particular index within the result set. It does that by including in its request the index of the first item to be returned (encapsulated in an <index/> element), as well as the maximum number of items to return. Note: For reasons mentioned in Paging Forwards Through a Result Set requesting entities SHOULD, where possible, specify pages using a UID instead of an index.

Note: If the responding entity omitted the <count/> element from previous responses for this result set, then the requesting entity SHOULD assume that the responding entity does not support page retrieval by index for this result set (see error below).

Example 12. Requesting a Result Page by Index

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='index10'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
      <index>10</index>
    </set>
  </query>
</iq>

The responding entity SHOULD derive the first UID from the specified index (the method used MAY be approximate) before returning the requested result set page in the normal way. If the specified index was "0" then the responding entity SHOULD derive the UID that is the first in the full result set.

Note: The 'index' attribute of the <first/> element MUST be the same as the index specified in the request. If the index specified by the requesting entity is greater than or equal to the number of items in the full set then the responding entity MUST return an empty page (see Paging Forwards Through a Result Set).

Example 13. Returning a Result Page at an Index

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='index10'>
  <query xmlns='jabber:iq:search'>
    <item jid='peter@pixyland.org'>
      <first>Peter</first>
      <last>Pan</last>
      <nick>Pete</nick>
    </item>
    .
    [8 more items]
    .
    <item jid='peter@rabbit.lit'>
      <first>Peter</first>
      <last>Rabbit</last>
      <nick>Pete</nick>
    </item>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <first index='10'>peter@pixyland.org</first>
      <last>peter@rabbit.lit</last>
      <count>800</count>
    </set>
  </query>
</iq>

If it would be either impossible or exceptionally resource intensive for the responding entity to derive the first UID from the specified index with reasonable accuracy then the responding entity MAY return a <feature-not-implemented/> error.

Example 14. Returning a Feature-not-Implemented Error

<iq type='error' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='index10'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>10</max>
      <index>10</index>
    </set>
  </query>
  <error type='cancel'>
    <feature-not-implemented xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

2.7 Getting the Item Count

In order to get the item count of a result set without retrieving the items themselves, the requesting entity simply specifies zero for the maximum size of the result set page:

Example 15. Requesting the Item Count

<iq type='get' from='stpeter@jabber.org/roundabout' to='users.jabber.org' id='count1'>
  <query xmlns='jabber:iq:search'>
    <nick>Pete</nick>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>0</max>
    </set>
  </query>
</iq>

The responding entity then returns the item count, which MAY be approximate rather than precise (since determining the exact number of items may be resource-intensive):

Example 16. Returning the Item Count

<iq type='result' from='users.jabber.org' to='stpeter@jabber.org/roundabout' id='count1'>
  <query xmlns='jabber:iq:search'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <count>800</count>
    </set>
  </query>
</iq>

Note: The <count/> element MAY be omitted, but only if it would be either impossible or exceptionally resource intensive to calculate reasonably accurate values.

Note: If there are no items in the full result set then the responding entity MUST return a response that adheres to the definition of the wrapper protocol (see Paging Forwards Through a Result Set).

3. Examples

The foregoing examples show the use of result set management in the context of Jabber Search.. Therefore in the following examples we show the use of result set management in the context of Service Discovery. A future version of this document may also include examples from Publish-Subscribe and Message Archiving and other XMPP protocol extensions.

Example 17. Requesting a Limit to the Result Set

<iq type='get' from='stpeter@jabber.org/roundabout' to='conference.jabber.org' id='ex2'>
  <query xmlns='http://jabber.org/protocol/disco#items'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>20</max>
    </set>
  </query>
</iq>

Example 18. Returning a Limited Result Set

<iq type='result' from='conference.jabber.org' to='stpeter@jabber.org/roundabout' id='ex2'>
  <query xmlns='http://jabber.org/protocol/disco#items'>
    <item jid='12@conference.jabber.org'/>
    <item jid='adium@conference.jabber.org'/>
    <item jid='airhitch@conference.jabber.org'/>
    <item jid='alphaville@conference.jabber.org'/>
    <item jid='apache@conference.jabber.org'/>
    <item jid='argia@conference.jabber.org'/>
    <item jid='armagetron@conference.jabber.org'/>
    <item jid='atticroom123@conference.jabber.org'/>
    <item jid='banquise@conference.jabber.org'/>
    <item jid='bar_paradise@conference.jabber.org'/>
    <item jid='beer@conference.jabber.org'/>
    <item jid='blondie@conference.jabber.org'/>
    <item jid='bpnops@conference.jabber.org'/>
    <item jid='brasileiros@conference.jabber.org'/>
    <item jid='bulgaria@conference.jabber.org'/>
    <item jid='cantinalivre@conference.jabber.org'/>
    <item jid='casablanca@conference.jabber.org'/>
    <item jid='chinortpcrew@conference.jabber.org'/>
    <item jid='coffeetalk@conference.jabber.org'/>
    <item jid='council@conference.jabber.org'/>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <first index='0'>acc3594e844c77696f7a7ba9367ae324b6b958ad</first>
      <last>4da91d4b330112f683dddaebf93180b1bd25e95f</last>
      <count>150</count>
    </set>
  </query>
</iq>

Example 19. Requesting a Page Beginning After the Last Item Received

<iq type='get' from='stpeter@jabber.org/roundabout' to='conference.jabber.org' id='ex3'>
  <query xmlns='http://jabber.org/protocol/disco#items'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>20</max>
      <after>4da91d4b330112f683dddaebf93180b1bd25e95f</after>
    </set>
  </query>
</iq>

4. Determining Support

In order for a requesting entity to determine if a responding entity supports result set management, it SHOULD send a Service Discovery information request to the responding entity:

Example 20. Requesting entity queries responding entity regarding protocol support

<iq from='stpeter@jabber.org/roundabout'
    to='conference.jabber.org'
    id='disco1'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>

Example 21. Responding entity communicates protocol support

<iq from='conference.jabber.org'
    to='stpeter@jabber.org/roundabout'
    id='disco1'>
  <query xmlns='http://jabber.org/protocol/disco#info'>
    ...
    <feature var='http://jabber.org/protocol/rsm'/>
    ...
  </query>
</iq>

A requesting entity SHOULD NOT include result set management extensions if it does not have positive knowledge that the responding entity supports the protocol defined herein. If the responding entity does not understand result set management, it MUST ignore the extension.

Note: Even if a responding entity understands the result set management protocol, its support for result set management in the context of any given using protocol is OPTIONAL (e.g., an implementation could support it in the context of the 'jabber:iq:search' namespace but not in the context of the 'http://jabber.org/protocol/disco#items' namespace). Currently the only way for a requesting entity to determine if a responding entity supports result set management in the context of a given using protocol is to include result set management extensions in its request. If the responding entity does not include result set management extensions in its response, then the requesting entity SHOULD NOT include such extensions in future requests wrapped by the using protocol namespace.

5. Security Considerations

Security considerations are the responsibility of the using ("wrapper") protocol, such as JEP-0030 for the 'http://jabber.org/protocol/disco#items' namespace and JEP-0055 for the 'jabber:iq:search' namespace.

6. IANA Considerations

This JEP requires no interaction with the Internet Assigned Numbers Authority (IANA) [6].

7. Jabber Registrar Considerations

7.1 Protocol Namespaces

The Jabber Registrar [7] shall include 'http://jabber.org/protocol/rsm' in its registry of protocol namespaces.

8. XML Schema 

<?xml version='1.0' encoding='UTF-8'?>

<xs:schema
    xmlns:xs='http://www.w3.org/2001/XMLSchema'
    targetNamespace='http://jabber.org/protocol/rsm'
    xmlns='http://jabber.org/protocol/rsm'
    elementFormDefault='qualified'>

  <xs:element name='set'>
    <xs:complexType>
      <xs:sequence>
        <xs:element name='after' type='xs:string' minOccurs='0' maxOccurs='1'/>
        <xs:element name='before' type='xs:string' minOccurs='0' maxOccurs='1'/>
        <xs:element name='count' type='xs:int' minOccurs='0' maxOccurs='1'/>
        <xs:element ref='first' minOccurs='0' maxOccurs='1'/>
        <xs:element name='index' type='xs:int' minOccurs='0' maxOccurs='1'/>
        <xs:element name='last' type='xs:string' minOccurs='0' maxOccurs='1'/>
        <xs:element name='max' type='xs:int' minOccurs='0' maxOccurs='1'/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:element name='first'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='xs:string'>
          <xs:attribute name='index' type='xs:int' use='optional'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

</xs:schema>

9. Acknowledgements

Thanks to Olivier Goffart, Jon Perlow, and Andrew Plotkin for their feedback.

Notes

1. JEP-0055: Jabber Search <http://www.jabber.org/jeps/jep-0055.html>.

2. JEP-0030: Service Discovery <http://www.jabber.org/jeps/jep-0030.html>.

3. JEP-0060: Publish-Subscribe <http://www.jabber.org/jeps/jep-0060.html>.

4. JEP-0136: Message Archiving <http://www.jabber.org/jeps/jep-0136.html>.

5. JEP-0045: Multi-User Chat <http://www.jabber.org/jeps/jep-0045.html>.

6. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols, such as port numbers and URI schemes. For further information, see <http://www.iana.org/>.

7. The Jabber Registrar maintains a list of reserved Jabber protocol namespaces as well as registries of parameters used in the context of protocols approved by the Jabber Software Foundation. For further information, see <http://www.jabber.org/registrar/>.

Revision History

Version 0.13 (2006-09-07)

Reverted to v0.11 with slight wording changes.

(ip/psa)

Version 0.12 (2006-09-06)

Added index attribute to before element; removed index element (use after or before instead).

(psa/vm)

Version 0.11 (2006-08-25)

Made count and index optional, changed protocol for getting count, more clarifications and examples.

(ip)

Version 0.10 (2006-08-24)

Added before and first elements, specified how to return an empty page and how to request the last page, removed reverse order sets, added out-of-order page access.

(ip)

Version 0.9 (2006-08-23)

Eliminated static result sets, justified expanded and clarified dynamic result sets, added page-not-found error, described when minimal state is necessary, added reverse order sets.

(ip)

Version 0.8 (2006-08-22)

Added optional method for handling dynamic result sets.

(psa)

Version 0.7 (2006-08-10)

Updated implementation note to clarify handling of result sets (static vs. dynamic).

(psa)

Version 0.6 (2006-07-12)

Updated implementation note to clarify handling of result sets (static vs. dynamic).

(psa)

Version 0.5 (2006-05-02)

Clarified error handling, determination of support in the context of using protocols, and security considerations.

(psa)

Version 0.4 (2006-04-24)

Specified that an item count may be approximate; specified that an item count may be returned with a page of results.

(psa)

Version 0.3 (2006-04-21)

Added <end/> element to specify last result set; added service discovery information; added more examples.

(psa/vm)

Version 0.2 (2005-12-22)

Revived and renamed the JEP; modified syntax; added use case for getting number of items; defined XML schema.

(psa/vm)

Version 0.1 (2002-11-12)

Initial version.

(jls)

END