XEP-0136: Message Archiving

This document defines mechanisms and preferences for the archiving and retrieval of XMPP messages.

NOTICE: This document is currently within Last Call or under consideration by the XMPP Council for advancement to the next stage in the XSF standards process.

Document Information

Author Information

Legal Notices

Copyright

Permissions

Permission is hereby granted, free of charge, to any person obtaining a copy of this specification (the "Specification"), to make use of the Specification without restriction, including without limitation the rights to implement the Specification in a software program, deploy the Specification in a network service, and copy, modify, merge, publish, translate, distribute, sublicense, or sell copies of the Specification, and to permit persons to whom the Specification is furnished to do so, subject to the condition that the foregoing copyright notice and this permission notice shall be included in all copies or substantial portions of the Specification. Unless separate permission is granted, modified works that are redistributed shall not contain misleading information regarding the authors, title, number, or publisher of the Specification, and shall not claim endorsement of the modified works by the authors, any organization or project to which the authors belong, or the XMPP Standards Foundation.

Disclaimer of Warranty

## NOTE WELL: This Specification is provided on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. In no event shall the XMPP Standards Foundation or the authors of this Specification be liable for any claim, damages, or other liability, whether in an action of contract, tort, or otherwise, arising from, out of, or in connection with the Specification or the implementation, deployment, or other use of the Specification. ##

Limitation of Liability

In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall the XMPP Standards Foundation or any author of this Specification be liable for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising out of the use or inability to use the Specification (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if the XMPP Standards Foundation or such author has been advised of the possibility of such damages.

IPR Conformance

This XMPP Extension Protocol has been contributed in full conformance with the XSF's Intellectual Property Rights Policy (a copy of which may be found at <http://www.xmpp.org/extensions/ipr-policy.shtml> or obtained by writing to XSF, P.O. Box 1641, Denver, CO 80201 USA).

Discussion Venue

Relation to XMPP

The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 3920) and XMPP IM (RFC 3921) specifications contributed by the XMPP Standards Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this document has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.

Conformance Terms

The following keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".

1. Introduction
2. Archiving Preferences
    2.1. Introduction
    2.2. Preference Syntax
       2.2.1. Auto Element
       2.2.2. Default Element
         2.2.2.1. expire Attribute
         2.2.2.2. otr Attribute
         2.2.2.3. save Attribute
       2.2.3. Item Element
         2.2.3.1. expire Attribute
         2.2.3.2. jid Attribute
         2.2.3.3. otr Attribute
         2.2.3.4. save Attribute
       2.2.4. Method Element
         2.2.4.1. type Attribute
         2.2.4.2. use Attribute
    2.3. Determining Preferences
    2.4. Setting Default Modes
    2.5. Setting Modes for a Contact
    2.6. Setting Archiving Method Preferences
3. Off The Record
    3.1. OTR Negotiation
    3.2. Notes
4. Collections: The Chat Element
    4.1. start Attribute
    4.2. subject Attribute
    4.3. thread Attribute
    4.4. version Attribute
    4.5. with Attribute
    4.6. from and to Elements
    4.7. note Element
5. Manual Archiving
    5.1. Introduction
    5.2. Uploading Messages to a Collection
    5.3. Changing the Subject of a Collection
    5.4. Offline Messages
    5.5. Groupchat Messages
    5.6. Linking Collections
    5.7. Associating Attributes with a Collection
6. Automatic Archiving
7. Archive Management
    7.1. Retrieving a List of Collections
    7.2. Retrieving a Collection
    7.3. Removing a Collection
8. Replication
9. Determining Server Support
10. Implementation Notes
    10.1. Time Synchronization
    10.2. Bandwidth Considerations
    10.3. Storage Considerations
11. Stream Feature
12. Security Considerations
    12.1. Automatic Archiving Defaulting to On
    12.2. Store Headers
13. IANA Considerations
14. XMPP Registrar Considerations
    14.1. Protocol Namespace
    14.2. Service Discovery Features
15. XML Schema
16. Acknowledgements
Notes
Revision History

1. Introduction

Many XMPP clients implement some form of client-side message archiving. However, it is not always convenient or even possible to archive messages locally, e.g., because it is easier to keep all archives in one universally accessible place (not scattered around on multiple computers or devices) or because the client operates in a web browser or resides on a mobile device that does not have sufficient local storage for message archiving. In addition, server-side archiving makes it possible to offer new services such as integration of instant messaging and email. Therefore it is beneficial to define methods for server-side archiving of XMPP messages.

So that client and server developers can refer to one specification, both approaches are defined in this document. In addition, this document defines common methods for retrieving and managing archived messages.

Note: Complying with XMPP Core, the server MUST respond to all <iq/> element of type 'get' or 'set'. However, most successful responses have been omitted from this document in the interest of conciseness.

2. Archiving Preferences

2.1 Introduction

Not all users want to archive messages. A client SHOULD save its user's default archiving preference (or "Save Mode") to its own server (i.e., specify whether by default all conversations should be archived or not). In addition, a client MAY save different preferences for particular contacts.

Some users may also prefer that the messages they exchange with contacts are "Off The Record" (OTR). [1] A client SHOULD save its user's default and contact-specific OTR preferences (or "OTR Modes") to its own server.

Whichever archiving method a client uses (e.g., local archiving to files or a database, or server-side archiving that happens either automatically or manually), it SHOULD adhere to its user's archiving preferences as stored on the server. However, a client MAY maintain a set of preferences in a local file which takes precedence over the preferences stored on the server for both local archiving and server-side archiving.

This section addresses the following use cases:

A client determines its user's current default Save Mode and OTR Mode, and the Modes for particular contacts.
A client sets the default Save Mode and OTR Mode.
A client sets the Save Mode and OTR Mode for a particular contact.

2.2 Preference Syntax

Archiving preferences are encapsulated in four children of the <pref/> element: <auto/>, <default/>, <item/>, and <method/>. These are defined in the following sections.

In order to capture a complete set of preferences, when the server returns the user's preferences to the client the <pref/> element:

MUST include an <auto/> element that specifies whether automatic archiving is on or off.
MUST include a <default/> element that specifies the user's default settings for OTR Mode and Save Mode.
MAY include one or more <item/> elements that specify preferences related to particular contacts.
MUST include at least three <method/> elements, differentiated by the value of the 'type' attribute (i.e., at least one <method/> element each for "auto", "local", and "manual").

An example follows.

Example 1. Complete Preferences

<iq type='result' id='pref1' to='juliet@capulet.com/chamber'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <auto save='false'/>
    <default expire='31536000' otr='concede' save='body'/>
    <item jid='romeo@montague.net' otr='require' save='false'/>
    <item expire='630720000' jid='benvolio@montague.net' otr='forbid' save='message'/>
    <method type='auto' use='forbid'/>
    <method type='local' use='concede'/>
    <method type='manual' use='prefer'/>
  </pref>
</iq>

2.2.1 Auto Element

The <auto/> element specifies the current Automatic Archiving settings for this stream.

This element MUST be empty and MUST include a boolean 'save' attribute [2] that specifies whether automatic archiving is enabled or disabled for this stream.

2.2.2 Default Element

The <default/> element specifies the default settings for both OTR Mode and Save Mode. The element MUST be empty and MUST include an 'otr' attribute and a 'save' attribute. The element MAY include an 'expire' attribute.

2.2.2.1 expire Attribute

If the 'save' attribute is not set to 'false' then is RECOMMENDED to also include an 'expire' attribute, which indicates how many seconds after messages are archived that the server SHOULD delete them.

2.2.2.2 otr Attribute

The 'otr' attribute specifies the user's default setting for OTR Mode. The allowable values are:

approve -- the user MUST explicitly approve off-the-record communication.
concede -- communications MAY be off the record if requested by another user.
forbid -- communications MUST NOT be off the record.
oppose -- communications SHOULD NOT be off the record even if requested.
prefer -- communications SHOULD be off the record if possible.
require -- communications MUST be off the record. *

* Note: If the OTR Mode is 'require' then the Save Mode MUST be 'false'. An 'otr' attribute value of "require" in Message Archiving is equivalent to a 'logging' attribute value of "mustnot" in Stanza Session Negotiation; for details, see the OTR Negotiation section of this document.

2.2.2.3 save Attribute

The 'save' attribute specifies the user's default setting for Save Mode. The allowable values are:

body -- the saving entity SHOULD save only <body/> elements. *
false -- the saving entity MUST save nothing.
message -- the saving entity SHOULD save the full XML content of each <message/> element. **
stream -- the saving entity SHOULD save every byte that passes over the stream in either direction. ***

* Note: When archiving locally a client MAY save the full XML content of each <message/> element even if the Save Mode is 'body'.

** Note: Support for the 'message' value is optional and, to conserve bandwidth and storage space, it is RECOMMENDED that client implementations do not specify the 'message' value. [3]

*** Note: The upload, retrieval and management of 'stream' archives is currently beyond the scope of this document.

2.2.3 Item Element

The <item/> element specifies the settings for both the OTR Mode and Save Mode with regard to a particular entity. The element MUST be empty and MUST include a 'jid' attribute, an 'otr' attribute, and a 'save' attribute. The element MAY include an 'expire' attribute.

2.2.3.1 expire Attribute

2.2.3.2 jid Attribute

The 'jid' attribute specifies the JabberID of the XMPP entity to which the preferences specified in this <item/> element apply.

2.2.3.3 otr Attribute

The 'otr' attribute specifies the user's setting for OTR Mode with regard to the specified JID. The allowable values are:

approve -- the user MUST explicitly approve off-the-record communication.
concede -- communications MAY be off the record if requested by another user.
forbid -- communications MUST NOT be off the record.
oppose -- communications SHOULD NOT be off the record even if requested.
prefer -- communications SHOULD be off the record if possible.
require -- communications MUST be off the record. *

2.2.3.4 save Attribute

The 'save' attribute specifies the user's setting for Save Mode with regard to the specified JID. The allowable values are:

body -- the saving entity SHOULD save only <body/> elements.
false -- the saving entity MUST save nothing.
message -- the saving entity SHOULD save the full XML content of each <message/> element.
stream -- the saving entity SHOULD save every byte that passes over the stream in either direction. *

* Note: The upload, retrieval and management of 'stream' archives is currently beyond the scope of this document.

2.2.4 Method Element

Each <method/> element specifies the the user's preferences for one available archiving method. The <method/> element MUST be empty and MUST include both the 'type' and 'use' attributes.

2.2.4.1 type Attribute

The allowable values of the 'type' attribute are:

auto -- preferences for use of automatic archiving on the user's server.
local -- preferences for use of local archiving to a file or database on the user's machine or device.
manual -- preferences for use of manual archiving by the user's client to the user's server.

2.2.4.2 use Attribute

The allowable values of the 'use' attribute are:

concede -- this method MAY be used if no other methods are available.
forbid -- this method MUST NOT be used.
prefer -- this method SHOULD be used if available.

2.3 Determining Preferences

In order to determine its user's current Save Mode(s) and OTR Mode(s), a client sends to its server an IQ-get containing an empty <pref/> element qualified by the 'urn:xmpp:tmp:archive' namespace (see Protocol Namespaces regarding issuance of one or more permanent namespaces).

Example 2. Client Requests Archiving Preferences

<iq type='get' id='pref1'>
  <pref xmlns='urn:xmpp:tmp:archive'/>
</iq>

The server responds with the default Save Mode and OTR Mode (a single <default/> element) and any specific Save Modes and OTR Modes for individual contacts (zero or more <item/> elements).

Example 3. Server Returns Preferences

<iq type='result' id='pref1' to='juliet@capulet.com/chamber'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <auto save='false'/>
    <default expire='31536000' otr='concede' save='body'/>
    <item jid='romeo@montague.net' otr='require' save='false'/>
    <item expire='630720000' jid='benvolio@montague.net' otr='forbid' save='message'/>
    <method type='auto' use='forbid'/>
    <method type='local' use='concede'/>
    <method type='manual' use='prefer'/>
  </pref>
</iq>

The foregoing preferences can be explained as follows:

By default, message bodies should be saved (according the preferred method specified later), communications may be off the record if requested, and any saved messages should be expired after 1 year.
When communicating with romeo@montague.net, both entities must not save messages and all communications must be off the record.
When communicating with benvolio@montague.net, both entities should save full messages, communications must not be off the record, and any saved messages should be expired after 20 years.
Server-side archiving must not occur automatically.
Local archiving may be used if requested.
Manual server-side archiving is preferred.

If the user has never set the default Modes, the 'save' and 'otr' attributes SHOULD specify the server's default settings, and the 'unset' attribute SHOULD be set to 'true'. Note: The 'unset' attribute defaults to 'false'.

Example 4. Server Returns Service Default Preferences

<iq type='result' id='pref1' to='juliet@capulet.com/chamber'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <default otr='concede' save='false' unset='true'/>
    <method type='auto' use='concede'/>
    <method type='local' use='concede'/>
    <method type='manual' use='concede'/>
    <auto save='false'/>
  </pref>
</iq>

Once it has received a request for archiving preferences from the client, the server MUST send any subsequent changes to any of the user's archiving preferences to the client until the stream is closed (see below). Note: changes to the <auto/> element MUST NOT be replicated in this way.

2.4 Setting Default Modes

A client may set the default Modes:

Example 5. Client Sets Default Modes

<iq type='set' id='pref2'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <default otr='prefer' save='false'/>
  </pref>
</iq>

If the server can process the request, it acknowledges the change:

Example 6. Server Acknowledges Change

<iq type='result' id='pref2' to='juliet@capulet.com/chamber'/>

The server then MUST inform all of the user's connected resources that have previously requested the user's archiving preferences:

Example 7. Server Pushes New Modes

<iq type='set' id='push1' to='juliet@capulet.com/chamber'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <default otr='prefer' save='false'/>
  </pref>
</iq>

<iq type='set' id='push2' to='juliet@capulet.com/pda'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <default otr='prefer' save='false'/>
  </pref>
</iq>

If the server does not allow the saving of full message stanza content, the client set the value of the 'save' attribute to 'message' or 'stream', and any of the user's connected resources have Automatic Archiving enabled, then the server SHOULD return a <feature-not-implemented/> error.

If administrator policies require that at least the <body/> elements (or the full content) of every message must be logged automatically and the client attempts to set the value of the 'save' attribute to 'false' or 'body', then the server SHOULD return a <not-acceptable/> error.

2.5 Setting Modes for a Contact

A client may use a similar protocol to set the Modes for a particular contact or domain of contacts (bare JID, full JID or domain). Note: It is STRONGLY RECOMMENDED for the value of the 'jid' attribute to be a bare JID (<localpart@domain.tld>) rather than a full JID (<localpart@domain.tld/resource>).

Example 8. Client Sets Modes for a Contact

<iq type='set' id='pref3'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <item jid='romeo@montague.net' save='body' expire='604800' otr='concede'/>
  </pref>
</iq>

Example 9. Server Acknowleges Change

<iq type='result' id='pref3' to='juliet@capulet.com/chamber'/>

Example 10. Server Pushes New Modes

<iq type='set' id='push3' to='juliet@capulet.com/chamber'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <item jid='romeo@montague.net' save='body' expire='604800' otr='concede'/>
  </pref>
</iq>

<iq type='set' id='push4' to='juliet@capulet.com/pda'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <item jid='romeo@montague.net' save='body' expire='604800' otr='concede'/>
  </pref>
</iq>

The same error cases apply as when Setting Default Modes.

In order to remove all preferences for a contact, the client shall send an <itemremove/> element to the server.

Example 11. Client Removes Preferences for a Contact

<iq type='set' id='remove1'>
  <itemremove xmlns='urn:xmpp:tmp:archive'>
    <item jid='benvolio@montague.net'/>
  </itemremove>
</iq>

Example 12. Server Acknowleges Change

<iq type='result' id='remove1' to='juliet@capulet.com/chamber'/>

2.6 Setting Archiving Method Preferences

The client can set one or more method preferences by sending an IQ-set containing a <pref/> element that in turn contains one or more <method/> elements.

Example 13. Client Sets Method Preferences

<iq type='set' id='pref4'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <method type='auto' use='concede'/>
    <method type='local' use='forbid'/>
    <method type='manual' use='prefer'/>
  </pref>
</iq>

Example 14. Server Acknowleges Change

<iq type='result' id='pref4' to='juliet@capulet.com/chamber'/>

If the client includes less than three <method/> elements, the server MUST NOT modify the unspecified methods and MUST leave them as currently stored on the server. However, when the server pushes the method preferences it MUST include all of the preferences, not only those that were set by the client.

Example 15. Server Pushes New Method Preferences

<iq type='set' id='push5' to='juliet@capulet.com/chamber'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <method type='auto' use='concede'/>
    <method type='local' use='forbid'/>
    <method type='manual' use='prefer'/>
  </pref>
</iq>

<iq type='set' id='push6' to='juliet@capulet.com/pda'>
  <pref xmlns='urn:xmpp:tmp:archive'>
    <method type='auto' use='concede'/>
    <method type='local' use='forbid'/>
    <method type='manual' use='prefer'/>
  </pref>
</iq>

3. Off The Record

A user will sometimes exchange messages with contacts who prefer that their conversations are not archived by either party.

3.1 OTR Negotiation

Any client that archives messages SHOULD support Stanza Session Negotiation and its 'logging' field both to give other contacts the opportunity to indicate this preference, and to negotiate an "Off The Record" (OTR) policy that complies with its user's own Archiving Preferences.

Note: A client MUST NOT propose or agree to enable OTR (i.e., disallow message logging) unless it has confirmed that its server will allow it to switch off Automatic Archiving. The client can do so based on the rules in the Automatic Archiving section of this document. If the client logs in and does not receive a warning message, it can assume that automatic archiving is not on by default. If the client does receive a warning message because automatic archiving is on by default, the client can determine if auto-archiving can be turned off by trying to do so; if the client receives an error, it knows that automatic archiving cannot be turned off.

Both parties to a stanza session negotiation may have OTR preferences (i.e, the initiating party or "user" and the responding party or "contact"). These preferences will interact in the ways specified below, resulting either in a successful negotiation or an unsuccessful negotiation (naturally, an unsuccessful negotiation can lead to a subsequent negotiation attempt by the user or the contact).

The following table shows how to instantiate the user's OTR preference in a stanza session negotiation (SSN) offer. The various OTR preferences map to particular values of the SSN 'logging' field, including the order of values for that field. In particular, an SSN logging value of 'may' means that the receiving party MAY enable message logging and an SSN logging value of 'mustnot' means that the receiving party MUST NOT enable message logging.

Table 1: Stanza Session Negotiation logging options offered by initiating party (user)

User's OTR Preference	Offering 'logging' Negotiation Option(s)*
require	mustnot**
prefer	mustnot,may
approve	mustnot,may
concede	may,mustnot***
oppose	may,mustnot***
forbid	may***

* In order of preference, the first value is the default.

** If the user receives no response it MUST NOT send any messages to the contact.

*** Alternatively, the user MAY decide not to initiate an OTR negotiation and to save messages (until the contact initiates a negotiation).

Note: When negotiating a stanza session, the user MUST include the <required/> element inside the 'logging' <field/> element. If the user does not receive a successful response to its chat negotiation request (and if the OTR Mode is not 'require'), then it SHOULD proceed as if the contact had responded with the value of the 'logging' <field/> element set to 'may'.

The following table shows what stanza session negotiation values the responding party (i.e., "contact") should send for the 'logging' field in its response to a stanza session negotiation request from the user.

Table 2: Stanza Session Negotiation logging value selected by responding party (contact)

Contact's OTR Preference	Responding 'logging' Negotiation Values*
Initiator Options -->	mustnot	mustnot,may*	may,mustnot*	may
require OTR mode	mustnot	mustnot	mustnot	fail**
prefer OTR mode	mustnot	mustnot	mustnot	may
approve OTR mode	mustnot	mustnot	may	may
concede OTR mode	mustnot	mustnot	may	may
oppose OTR mode	mustnot	may	may	may
forbid OTR mode	fail**	may	may	may

* The first value is the default.

** The negotiation fails and the parties MUST NOT exchange any messages; however, the recipient MAY attempt to initiate a stanza session negotiation with the other party.

Note: If a contact does not include a 'logging' field in its initial Stanza Session Negotiation request, and a user's Archiving Preferences indicate that OTR is required, then the client MUST refuse the request. It MAY then send its own Stanza Session Negotiation request with a 'logging' field.

If a user's OTR preference for a contact changes during a Chat Session that has been negotiated with the contact, and if the new preference would affect the value of the 'logging' field that was previously negotiated, then the client MUST immediately renegotiate the 'logging' field according to the user's new OTR preference (or terminate the Chat Session).

3.2 Notes

If a Stanza Session Negotiation agreed to enable OTR then the clients MUST NOT allow messages sent in either direction to be archived in any way (including Manual Archiving and Automatic Archiving). [4]

If a Stanza Session Negotiation agreed to enable OTR then both clients MUST ensure that the Stanza Session Negotiation messages themselves are not archived. For example, if Automatic Archiving was enabled when the client received the initial Stanza Session Negotiation request, then the client MUST immediately ask its server to delete its copy of the request (see Removing a Collection for a description of how to remove the messages currently being recorded by the server).

4. Collections: The Chat Element

Whether manual archiving or automatic archiving is used, messages are archived in the form of "collections. A collection is a set of messages to/from the same user that are received near each other in time or as part of the same conversation thread. A collection is intended to mimic the natural flow of human conversations, which in instant messaging (IM) systems tend to occur in bursts (e.g., a five-minute conversation one day, followed by a ten-minute conversation the next).

Each collection of messages and notes is encapsulated in a <chat/> element and is uniquely identified by the combination of the 'start' and 'with' attributes as defined below. The syntax of the <chat/> element is specified in this section.

4.1 start Attribute

The 'start' attribute specifies the start time of the conversation thread, which MUST be UTC and adhere to the DateTime format specified in XMPP Date and Time Profiles [5].

4.2 subject Attribute

The 'subject' attribute specifies a friendly name for the collection (note the Security Considerations regarding the subject attribute). Inclusion of the 'subject' attribute is OPTIONAL.

4.3 thread Attribute

A client SHOULD include a thread ID in each <message/> element it sends that is part of a conversation it expects will be archived (as explained in Best Practices for Message Threads [6], a thread ID is captured in the <thread/> child of the <message/> element).

If the messages contained in a conversation contain a thread ID, then the server MUST map that thread ID to the 'thread' attribute of the <chat/> element. There MUST be a one-to-one mapping between the <thread/> element and the 'thread' attribute.

If a thread ID is not included, the server may use its own implementation-specific methods for mapping messages and conversations to collections.

The content of <message/> elements that have different thread IDs SHOULD be archived in separate collections and the content of <message/> elements that have the same thread IDs SHOULD be archived in the same collection; this is the responsibility of the client if manual archiving is used and the responsibility of the server if automatic archiving is used. The thread attribute SHOULD NOT be set to any value other than the exact content of the <thread/> elements. If no <thread/> elements appeared in the conversation then the <chat/> element SHOULD have no thread attribute. Implementations SHOULD use the thread attribute for cross-referencing purposes only, within the archive each collection MUST be uniquely identified by the combination of its 'with' and 'start' attributes.

Inclusion of the 'thread' attribute is RECOMMENDED.

4.4 version Attribute

Upon receiving a manually-uploaded collection or creating a collection as a result of auto-archiving, the server MUST assign a version number to the collection, which MUST start at zero (0). Whenever the collection is modified, the server MUST increment the version number by one (1). The server MUST include the version number attribute whenever it sends the collection or information about the collection to the client, by including a 'version' attribute in the <chat/>, <changed/>, or <removed/> element. If the client includes a 'version' attribute in an IQ-set, the server MUST ignore it.

Inclusion of the 'version' attribute is REQUIRED of servers.

4.5 with Attribute

The 'with' attribute specifies the JID with which the messages were exchanged. If the JID is of the form (<localpart@domain.tld>), any resource matches; if the JID is of the form (<domain.tld>), any node matches. If the client or server wishes to match an exact bare JID, the boolean 'exactmatch' attribute MUST be included and MUST be set yo "true" or "0" [7].

Inclusion of the 'with' attributwe is REQUIRED.

4.6 from and to Elements

The content of each individual message MUST be encapsulated in a <to/> or <from/> element. The time in whole seconds of the message relative to the previous message in the collection (or, for the first message, relative to the start of the collection) SHOULD be specified with a 'secs' attribute. Note: When deciding whether to round up or down to a number of whole seconds, entities MUST ensure that the sum of the 'secs' attribute and the 'secs' attributes of the preceeding messages will accurately reflect the absolute time of the message. (e.g., if a sequence of messages occur at exactly 0.51-second intervals then the 'secs' attributes should generally alternate between '0' or '1'.)

The content of each <to/> or <from/> element SHOULD depend on the user's Archiving Preferences. <to/> or <from/> elements MUST NOT be empty. Note: A server MAY be configured to return a <feature-not-implemented/> error if any <to/> or <from/> element contains anything other than <body/> elements.

4.7 note Element

The <note/> element specifies a private note about the conversation. The absolute time the note was created SHOULD be specified with a 'utc' attribute (which MUST be UTC and adhere to the DateTime format specified in XEP-0082). Inclusion of the <note/> element is OPTIONAL.

5. Manual Archiving

5.1 Introduction

While automatic archiving is easy for the client and server to implement, there are many contexts in which manual archiving is required. For examples, when:

Messages are encrypted using evanescent keys, as in Encrypted Session Negotiation [8]
A client's own server does not support automatic archiving but it (or another server) does support manual archiving
A server does not support encryption of auto-archived collections (see Encryption of Archived Messages [9])
A client wants to maintain a unified archive for messages that were transmitted both in and out-of-band (e.g. SMS or email)
A client wants to append private notes to a conversation

Therefore, often a client will want to send or receive a sequence of messages, optionally add private notes to the sequence, optionally encrypt the sequence (see XEP-0241), and then ask the server to archive it. Such messages and notes SHOULD be stored on the server in the form of a "collection".

5.2 Uploading Messages to a Collection

A collection of messages and notes is uploaded to the server encapsulated in a <save/> element.

Example 16. Storing messages in a collection

<iq type='set' id='up1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'
          thread='damduoeg08'
          subject='She speaks!'>
      <from secs='0'><body>Art thou not Romeo, and a Montague?</body></from>
      <to secs='11'><body>Neither, fair saint, if either thee dislike.</body></to>
      <from secs='7'><body>How cam'st thou hither, tell me, and wherefore?</body></from>
      <note utc='1469-07-21T03:04:35Z'>I think she might fancy me.</note>
    </chat>
  </save>
</iq>

If the collection does not exist then the server MUST create a new collection and inform the client that the collection version number is zero.

Example 17. Collection created

<iq type='result' id='up1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'
          thread='damduoeg08'
          subject='She speaks!'
          version='0'/>
    </chat>
  </save>
</iq>

If the collection already exists then the server MUST append the messages to the existing collection (which MAY involve adding messages that appear to be duplicates, i.e., messages that have identical <from/> elements, <to/> elements, and dateTimes).

Example 18. Messages appended to collection

<iq type='result' id='up1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'
          thread='damduoeg08'
          subject='She speaks!'
          version='1'/>
    </chat>
  </save>
</iq>

Note: Clients MUST take care to append each sequence of messages to the collection before the sequence becomes so large that uploading it may violate common rate limiting restrictions (in Jabber systems, often called "karma").

If the server cannot service an upload request because the collection is too large then it MUST return a <not-acceptable/> error:

Example 19. Unsuccessful reply

<iq type='error' to='romeo@montague.net/orchard' id='up1'>
  <error code='406' type='modify'>
    <not-acceptable xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

5.3 Changing the Subject of a Collection

If the client specifies a new value for the 'subject' attribute of any existing collection then the server MUST update the existing value and increment the collection version. Note: The client cannot specify new values for the 'with' or 'start' attributes. The only way to change these values is to delete the collection (see Removing a Collection) and then create a new one.

Example 20. Changing the subject of a collection without appending messages

<iq type='set' id='subject1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'
          subject='She speaks twice!'/>
  </save>
</iq>

Example 21. Collection subject updated

<iq type='result' id='subject1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'
          subject='She speaks twice!'
          version='1'/>
    </chat>
  </save>
</iq>

5.4 Offline Messages

The client MAY specify an absolute time for any message by providing a 'utc' attribute (which MUST be UTC and adhere to the DateTime format specified in XEP-0082) instead of a 'secs' attribute. The absolute time MAY be earlier than the start time of the collection:

Example 22. Storing offline messages in a collection

<iq type='set' id='up2'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'
          subject='She speaks!'>
      <from utc='1469-07-21T00:32:29Z'><body>Art thou not Romeo, and a Montague?</body></from>
      <to secs='11'><body>Neither, fair saint, if either thee dislike.</body></to>
      <from secs='7'><body>How cam'st thou hither, tell me, and wherefore?</body></from>
    </chat>
  </save>
</iq>

5.5 Groupchat Messages

A client MAY archive messages that it receives from Multi-User Chat [10] rooms. The 'with' attribute MUST be the bare JID of the room. The client MUST include a 'name' attribute for each <from/> element to specify the room nickname of the message sender and MAY include a 'jid' attribute to specify the full or bare JID of the sender (if available).

Example 23. Storing groupchat messages in a collection

<iq type='set' id='up3'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='balcony@house.capulet.com'
          start='1469-07-21T03:16:37Z'>
      <from secs='0' name='benvolio'><body>She will invite him to some supper.</body></from>
      <from secs='6' name='mercutio'><body>A bawd, a bawd, a bawd! So ho!</body></from>
      <from secs='3' name='romeo' jid='romeo@montague.net'><body>What hast thou found?</body></from>
    </chat>
  </save>
</iq>

5.6 Linking Collections

Collections MAY be linked together by including a <previous/> and/or <next/> element. Each such element MUST include both a 'with' and a 'start' element to identify the other collection to which the collection is linked. For example, the <previous/> and <next/> elements in the two examples below are being used to link a groupchat between Romeo, Benvolio and Mercutio to a private chat that Romeo was having with Benvolio before they invited Mercutio to join them. Note: Collections MAY be linked in only one direction, they are not required to be double-linked in the way the examples below are.

Example 24. Private chat linked to later groupchat

<iq type='set' id='link1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='benvolio@montague.net'
          start='1469-07-21T03:01:54Z'>
      <next with='balcony@house.capulet.com' start='1469-07-21T03:16:37Z'/>
      <to secs='0'><body>O, I am fortune's fool!</body></to>
      <from secs='4'><body>Why dost thou stay?</body></from>
    </chat>
  </save>
</iq>

Example 25. Groupchat linked to earlier private chat

<iq type='set' id='link2'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='balcony@house.capulet.com'
          start='1469-07-21T03:16:37Z'>
      <previous with='benvolio@montague.net' start='1469-07-21T03:01:54Z'/>
      <from secs='0' name='benvolio'><body>She will invite him to some supper.</body></from>
      <from secs='6' name='mercutio'><body>A bawd, a bawd, a bawd! So ho!</body></from>
      <from secs='3' name='romeo'><body>What hast thou found?</body></from>
    </chat>
  </save>
</iq>

A collection MUST NOT contain more than one <previous/> and one <next/> element. If a <previous/> element is uploaded to a collection that already contains one then the older <previous/> element MUST be discarded. The same requirement applies for <next/> elements.

When a collection is retrieved (see Retrieving a Collection) the <previous/> and <next/> elements MUST appear as the first elements in the collection, whatever order they were uploaded in.

<previous/> and <next/> elements MAY be removed from a collection simply by uploading a <previous/> and/or <next/> element without any 'with' or 'start' attributes. Note: The server SHOULD NOT return an error if it finds that a link to be deleted does not exist.

Example 26. Deleting any links to other collections

<iq type='set' id='link3'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='balcony@house.capulet.com'
          start='1469-07-21T03:16:37Z'>
      <previous/>
      <next/>
    </chat>
  </save>
</iq>

5.7 Associating Attributes with a Collection

A client MAY append attributes to a collection by including an x:data form of type 'submit' (see Data Forms [11]) when it uploads to a collection.

A collection MUST NOT contain more than one x:data form. If a form is uploaded to a collection that already contains one then the older form element MUST be discarded. When a collection is retrieved (see Retrieving a Collection) the x:data form MUST appear as the first element in the collection after any <previous/> or <next/> elements, whatever order it was uploaded in. Upon retrieval the 'type' attribute of the form MAY be 'submit' or 'form'.

Any data forms for associating attributes are application-specific and are to be defined outside this specification. The following example shows attributes generated by a fictional application.

Example 27. Private chat with attributes form

<iq type='set' id='form1'>
  <save xmlns='urn:xmpp:tmp:archive'>
    <chat with='benvolio@montague.net'
          start='1469-07-21T03:01:54Z'>
      <to secs='0'><body>O, I am fortune's fool!</body></to>
      <from secs='4'><body>Why dost thou stay?</body></from>
      <x xmlns='jabber:x:data' type='submit'>
        <field var='FORM_TYPE'><value>http://example.com/archiving</value></field>
        <field var='task'><value>1</value></field>
        <field var='important'><value>1</value></field>
        <field var='action_before'><value>1469-07-29T12:00:00Z</value></field>
      </x>
    </chat>
  </save>
</iq>

As described in XEP-0241, the content of the uploaded x:data form MAY be encrypted.

6. Automatic Archiving

If server administration policies require that every message is logged automatically (see Security Considerations) then:

<message from='capulet.com' to='juliet@capulet.com/chamber'>
  <body>WARNING: All messages that you send or
        receive will be recorded by the server.</body>
</message>

The client can enable auto-archiving by setting the 'save' attribute to "true" or "1".

<iq type='set' id='auto1'>
  <auto save='true' xmlns='urn:xmpp:tmp:archive'/>
</iq>

If the server does not support the saving of full message stanza or stream content and the user has specified the 'message' or 'stream' Save Mode in one of its Archiving Preferences, the server MUST return a <feature-not-implemented/> error.

<iq type='error' id='auto1'>
  <error type='cancel'>
    <feature-not-implemented xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

The client can disable auto-archiving by setting the 'save' attribute to "false" or "0".

<iq type='set' id='auto3'>
  <auto save='false' xmlns='urn:xmpp:tmp:archive'/>
</iq>

If service policies require that every message is logged automatically, the server MUST return a <not-allowed/> error.

<iq type='error' id='auto3'>
  <error type='cancel'>
    <not-allowed xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

7. Archive Management

Manually uploaded and automatically saved collections are managed in the same way. There are three main areas of functionality related to archive management:

Requirements and protocol flows for each of these use cases are defined below. The protocols to retrieve a list of collections and an indivdual collection both make extensive use of Result Set Management [13]. Clients and servers SHOULD support all the features defined in that protocol.

7.1 Retrieving a List of Collections

To request a list of collections the client sends a <list/> element. The 'start' and 'end' attributes MAY be specified to indicate a date range (the values of these attributes MUST be UTC and adhere to the DateTime format specified in XEP-0082). The 'with' attribute MAY be specified to limit the list to a single participating full JID, bare JID or domain.

If the 'with' attribute is omitted then collections with any JID are returned. If only 'start' is specified then all collections on or after that date should be returned. If only 'end' is specified then all collections prior to that date should be returned.

The client SHOULD use Result Set Management to limit the number of collections returned by the server in a single stanza, taking care not to request a page of collections that is so big it might exceed rate limiting restrictions.

Example 33. Requesting the first page of a list with same JID

<iq type='get' id='juliet1'>
  <list xmlns='urn:xmpp:tmp:archive'
        with='juliet@capulet.com'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>30</max>
    </set>
  </list>
</iq>

Example 34. Requesting the first page of a list with same JID between two times

<iq type='get' id='period1'>
  <list xmlns='urn:xmpp:tmp:archive'
        with='juliet@capulet.com'
        start='1469-07-21T02:00:00Z'
        end='1479-07-21T04:00:00Z'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>30</max>
    </set>
  </list>
</iq>

Example 35. Requesting the first page of a list after a time

<iq type='get' id='list1'>
  <list xmlns='urn:xmpp:tmp:archive'
        start='1469-07-21T02:00:00Z'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>30</max>
    </set>
  </list>
</iq>

The server MUST list the collections (empty <chat/> elements including all attributes) in chronological order when responding to any request.

Note: In accordance with Result Set Management, the client MUST assume that the unique IDs it receives in the <first/> and <last/> elements are opaque. Servers MAY adopt a unique ID format other than the one suggested in the example above.

If no collections correspond to the request the server MUST return an empty <list/> element:

Example 36. Receiving an empty list

<iq type='result' to='romeo@montague.net/orchard' id='list1'>
  <list xmlns='urn:xmpp:tmp:archive'/>
</iq>

Example 37. Requesting the second page of a list

<iq type='get' id='list2'>
  <list xmlns='urn:xmpp:tmp:archive'
        start='1469-07-21T02:00:00Z'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>30</max>
      <after>1469-07-21T03:16:37Zbalcony@house.capulet.com</after>
    </set>
  </list>
</iq>

Refer to Result Set Management to learn more about the various ways that the pages of the list may be accessed.

7.2 Retrieving a Collection

To request a page of messages from a collection the client sends a <retrieve/> element. The 'with' and 'start' attributes specify the participating full JID and the start time (see XEP-0082). Both attributes MUST be included to uniquely identify a collection:

The client SHOULD use Result Set Management to limit the number of messages returned by the server in a single stanza, taking care not to request a page of messages that is so big it might exceed rate limiting restrictions.

Example 38. Requesting the first page of a collection

<iq type='get' id='page1'>
  <retrieve xmlns='urn:xmpp:tmp:archive'
            with='juliet@capulet.com/chamber'
            start='1469-07-21T02:56:15Z'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>100</max>
    </set>
  </retrieve>
</iq>

Example 39. Receiving the first page of a collection

<iq type='result' to='romeo@montague.net/orchard' id='page1'>
  <chat xmlns='urn:xmpp:tmp:archive'
        with='juliet@capulet.com/chamber'
        start='1469-07-21T02:56:15Z'
        subject='She speaks!'
        version='4'>
    <from secs='0'><body>Art thou not Romeo, and a Montague?</body></from>
    <to secs='11'><body>Neither, fair saint, if either thee dislike.</body></to>
    .
    [98 more messages]
    .
    <from secs='9'><body>How cam'st thou hither, tell me, and wherefore?</body></from>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <first index='0'>0</first>
      <last>99</last>
      <count>217</count>
    </set>
  </chat>
</iq>

Note: In accordance with Result Set Management, the client MUST assume the unique IDs it receives in the <first/> and <last/> elements are opaque. Servers MAY adopt a unique ID format other than the one suggested in the example above.

If the specified collection does not exist then the server MUST return an <item-not-found/> error:

Example 40. Unsuccessful reply

<iq type='error' to='romeo@montague.net/orchard' id='page1'>
  <retrieve xmlns='urn:xmpp:tmp:archive'
            with='juliet@capulet.com/chamber'
            start='1469-07-21T02:56:15Z'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>100</max>
    </set>
  </retrieve>
  <error code='404' type='cancel'>
    <item-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

If the requested collection is empty the server MUST return an empty <chat/> element:

Example 41. Receiving an empty collection

<iq type='result' to='romeo@montague.net/orchard' id='page1'>
  <chat xmlns='urn:xmpp:tmp:archive'
        with='juliet@capulet.com/chamber'
        start='1469-07-21T02:56:15Z'
        subject='She speaks!'
        version='5'/>
</iq>

Example 42. Requesting the second page of a collection

<iq type='get' id='page2'>
  <retrieve xmlns='urn:xmpp:tmp:archive'
            with='juliet@capulet.com/chamber'
            start='1469-07-21T02:56:15Z'>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>100</max>
      <after>99</after>
    </set>
  </retrieve>
</iq>

Refer to Result Set Management to learn more about the various ways that the pages of a collection may be accessed.

7.3 Removing a Collection

To request the removal of a single collection the client sends an empty <remove/> element. The 'with' and 'start' attributes MUST be included to uniquely identify the collection.

Example 43. Removing a single collection

<iq type='set' id='remove1'>
  <remove xmlns='urn:xmpp:tmp:archive'
          with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'/>
</iq>

The client may remove several collections at once. The 'start' and 'end' elements MAY be specified to indicate a date range. The 'with' attribute MAY be a full JID, bare JID or domain.

Example 44. Removing all collections with a specified bare JID between two times

<iq type='set' id='remove2'>
  <remove xmlns='urn:xmpp:tmp:archive'
          with='juliet@capulet.com'
          start='1469-07-21T02:00:00Z'
          end='1469-07-21T04:00:00Z'/>
</iq>

If the 'with' attribute is omitted then collections with any JID are removed.

If the end date is in the future then all collections on or after the start date are removed.

Example 45. Removing all collections after a date

<iq type='set' id='remove3'>
  <remove xmlns='urn:xmpp:tmp:archive'
          start='1469-07-21T02:00:00Z'
          end='2038-01-01T00:00:00Z'/>
</iq>

If the start date is before all the collections in the archive then all collections prior to the end date are removed.

Example 46. Removing all collections before a date

<iq type='set' id='remove4'>
  <remove xmlns='urn:xmpp:tmp:archive'
          start='0000-01-01T00:00:00Z'
          end='1469-07-21T04:00:00Z'/>
</iq>

Example 47. Removing all collections

<iq type='set' id='remove5'>
  <remove xmlns='urn:xmpp:tmp:archive'/>
</iq>

If the value of the optional 'open' attribute is set to 'true' then only collections that are currently being recorded automatically by the server (see Automatic Archiving) are removed.

Example 48. Removing a collection being recorded by the server

<iq type='set' id='remove6'>
  <remove xmlns='urn:xmpp:tmp:archive'
          with='juliet@capulet.com/chamber'
          open='true'/>
</iq>

Example 49. Removing all collections being recorded by the server

<iq type='set' id='remove7'>
  <remove xmlns='urn:xmpp:tmp:archive'
          open='true'/>
</iq>

If the specified collection (or collections) do not exist then the server MUST return an <item-not-found/> error:

Example 50. Unsuccessful reply

<iq type='error' to='romeo@montague.net/orchard' id='remove1'>
  <remove xmlns='urn:xmpp:tmp:archive'
          with='juliet@capulet.com/chamber'
          start='1469-07-21T02:56:15Z'/>
  <error code='404' type='cancel'>
    <item-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>
  </error>
</iq>

8. Replication

This section describes how a client can replicate an archive locally. [14] The existence of a local copy of the archive enables clients to search the content of all messages (including collections saved by another client machine). [15]

The client can "synchronize" its local copy of the archive with the "master" archive on the server at any time. The first step is to request the list of collections that the server has modified (created, changed, or removed) in its master archive since the last update to the client's copy of the archive.

Replication uses the <modified/> element. The list of collections that have been modified since a given time is requested by sending a <modified/> element to the server. The server then returns the list of collections that have been created, changed, or removed. A collection that has been created or changed is specified with a <changed/> element (with version zero for created collections), and a collection that has been removed is specified with a <removed/> element.

When requesting the list of modified collections, the client MUST embed appropriate Result Set Management data in the <modified/> element. The <modified/> element MUST include a 'start' attribute that specifies a UTC datetime (see XEP-0082) that it has previously received from the server or that it has determined locally (e.g., when synchronizing for the first time the client SHOULD choose a suitable time for the first page request, such as 1970-01-01T00:00:00Z).

<iq type='get' id='sync1'>
  <modified xmlns='urn:xmpp:tmp:archive'
            start='1469-07-21T01:14:47Z'
            version='3'/>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <max>50</max>
    </set>
  </modified>
</iq>

The server MUST return the changed collections in the chronological order that they were changed (most recent last). If a collection has been modified, created, or removed after the time specified by the 'start' attribute, then the server MUST include it in the returned result set page of collections (unless the specified maximum page size would be exceeded). Each <changed/> or <removed/> collection element (for modified/created, or removed collections respectively) in the returned list MUST include only 'with' and 'start' attribues. The XML character data of the <last/> element is a unique, persistent identifier created by the server, which MUST be treated as opaque by the client.

<iq type='result' to='romeo@montague.net/orchard' id='sync1'>
  <modified xmlns='urn:xmpp:tmp:archive'>
    <changed with='juliet@capulet.com/chamber'
             start='1469-07-21T02:56:15Z'
             version='0'/>
    [ ... up to 48 more collections ... ]
    <removed with='balcony@house.capulet.com'
             start='1469-07-21T03:16:37Z'
             version='3'/>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <last>ja923ljasnvla09woei777</last>
      <count>1372</count>
    </set>
  </modified>
</iq>

Note: The server should remember the 'with' and 'start' attribues and the time of removal of all deleted collections. If this "state" cannot be maintained indefinitely, then unless all the user's clients replicate before the server deletes its memory of a removal it will not be reflected in all the local copies of the archive.

Note: Along with its copy of the archive the client SHOULD save the most recent <last/> identifier that it received from the server. The next time it synchronizes with the server it SHOULD specify that identifier when requesting the first result set page by including it as the XML character data of the <after/> element in Result Set Management.

<iq type='get' id='sync2'>
  <modified xmlns='urn:xmpp:tmp:archive'
            start='1469-07-21T01:14:47Z'
            version='3'/>
    <set xmlns='http://jabber.org/protocol/rsm'>
      <after>ja923ljasnvla09woei777</after>
      <max>50</max>
    </set>
  </modified>
</iq>

After receiving each result set page the client SHOULD delete from its local archive any collections that have been removed from the master archive. The client should also retrieve from the server the content of each collection that has been modified (see Retrieving a Collection) and add it to its local copy of the archive (deleting any older version of the same collection that it may already have).

9. Determining Server Support

A client discovers whether its server supports this protocol using Service Discovery [16].

    
<iq from='romeo@montague.net/orchard'
    id='disco1' 
    to='montague.net'
    type='get'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>

For each feature defined herein, if the server supports that feature it MUST return a <feature/> element with the 'var' attribute set to 'urn:xmpp:tmp:archive:name' (see Protocol Namespaces regarding issuance of one or more permanent namespaces), where 'name' is 'auto' for the Automatic Archiving feature, 'manage' for the Archive Management feature, 'manual' for the Manual Archiving feature, and 'pref' for the Archiving Preferences feature.

    
<iq from='montague.net'
    id='disco1' 
    to='romeo@montague.net/orchard'
    type='get'>
  <query xmlns='http://jabber.org/protocol/disco#info'/>
    ...
    <feature var='urn:xmpp:tmp:archive'/>
    <feature var='urn:xmpp:tmp:archive:auto'/>
    <feature var='urn:xmpp:tmp:archive:manage'/>
    <feature var='urn:xmpp:tmp:archive:manual'/>
    <feature var='urn:xmpp:tmp:archive:pref'/>
    ...
  </query>
</iq>

10. Implementation Notes

10.1 Time Synchronization

When creating a new collection, it is RECOMMENDED that the client synchronizes the collection start time that it sends to the server with server time. This is important since the user may subsequently retrieve the archived collection using client machines whose UTC clocks are not synchronized with the client machine that uploaded the collection. (i.e. Either or both of the clients' UTC clocks may be wrong.) The client can achieve this synchronization with server time by using Entity Time [17] to estimate the difference between the server and client UTC clocks.

When retrieving collections, it is RECOMMENDED that the client adjusts the start times of the collections it receives from server to be synchronized with the clock of the client machine.

10.2 Bandwidth Considerations

When uploading messages using manual archiving, a client SHOULD NOT upload one message at a time to the server since this increases both bandwidth consumption and the total number of transactions. It is instead RECOMMENDED that clients upload messages only when the conversation thread appears to be terminated, e.g. when the user closes the chat window. If the user reopens the window and the thread continues then the client should append the new messages to the collection when the user closes the window again.

10.3 Storage Considerations

Server implementations SHOULD give system administrators the option to disable support for both automatic and manual archiving, since archived conversations can consume significant storage space.

11. Stream Feature

Although message archiving is not negotiated between a client and its server as part of stream negotiation, a server MAY advertise a stream feature of "urn:xmpp:tmp:archive" (see Protocol Namespaces regarding issuance of one or more permanent namespaces) during stream setup (via the <feature/> element, which MUST NOT contain a <required/> child), and MUST do so if automatic archiving is on by default (if so, the <feature/> element MUST include a <default/> child).

<feature xmlns='urn:xmpp:tmp:archive'/>

<feature xmlns='urn:xmpp:tmp:archive'>
  <default/>
</feature>

12. Security Considerations

12.1 Automatic Archiving Defaulting to On

If automatic archiving defaults to enabled then that creates serious privacy issues for users of legacy clients that do not support this protocol, and (more seriously) for those contacts who they unwittingly mislead by agreeing to disable logging (via the 'logging' field defined in Stanza Session Negotiation [18]).

If a server deployment enables automatic archiving by default, then it MUST return a stream feature containing an empty <default/> element (see the Stream Feature section of this document).

12.2 Store Headers

The client that originates a message MAY specify a 'false' value for the 'store' header (see Stanza Headers and Internet Metadata [19]). The recipient MUST NOT archive such a message or any of the information it contains.

If the sender plans to use 'store' headers it MUST use Service Discovery to determine whether or not the recipient supports them. Note: Since servers are not required to check the content of message stanzas for headers, if the recipient is using automatic archiving then it MUST indicate that it does not support 'store' headers.

If the recipient does not support 'store' headers, then the sender MUST confirm with its human user (if any) before sending such a message.

13. IANA Considerations

14. XMPP Registrar Considerations

14.1 Protocol Namespace

Until this specification advances to a status of Draft, its associated namespace shall be "urn:xmpp:tmp:archive"; upon advancement of this specification, the XMPP Registrar [21] shall issue a permanent namespace in accordance with the process defined in Section 4 of XMPP Registrar Function [22]. The namespace "urn:xmpp:archive" is requested, and is thought to be unique per the XMPP Registrar's requirements.

14.2 Service Discovery Features

The XMPP Registrar shall include the following features in its registry of service discovery features (see <http://www.xmpp.org/registrar/disco-features.html>), where the string "urn:xmpp:tmp:archive" shall be replaced with the URN issued by the XMPP Registrar:

urn:xmpp:tmp:archive:auto
urn:xmpp:tmp:archive:manage
urn:xmpp:tmp:archive:manual
urn:xmpp:tmp:archive:pref

15. XML Schema

<?xml version='1.0' encoding='UTF-8'?>

<xs:schema
    xmlns:xs='http://www.w3.org/2001/XMLSchema'
    targetNamespace='urn:xmpp:tmp:archive'
    xmlns='urn:xmpp:tmp:archive'
    elementFormDefault='qualified'>

  <xs:annotation>
    <xs:documentation>
      The allowable root elements for the namespace defined
      herein are:
        - archive
        - auto
        - chat
        - delete
        - itemremove
        - keys
        - list
        - modified
        - pref
        - remove
        - retrieve
        - save
    </xs:documentation>
  </xs:annotation>

  <xs:element name='archive'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='chat' minOccurs='1' maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:attribute name='with' type='xs:string' use='optional'/>
    </xs:complexType>
  </xs:element>

  <xs:element name='auto'>
    <xs:complexType>
      <xs:sequence>
        <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:attribute name='save' type='xs:boolean' use='required'/>
    </xs:complexType>
  </xs:element>

  <xs:element name='changed'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='start' type='xs:dateTime' use='required'/>
          <xs:attribute name='with' type='xs:string' use='required'/>
          <xs:attribute name='version' type='xs:nonNegativeInteger' use='required'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='chat'>
    <xs:complexType>
      <xs:choice minOccurs='0' maxOccurs='unbounded'>
        <xs:element name='from' type='messageType'/>
        <xs:element name='next' type='linkType'/>
        <xs:element ref='note'/>
        <xs:element name='previous' type='linkType'/>
        <xs:element name='to' type='messageType'/>
        <xs:any processContents='lax' namespace='##other'/>
      </xs:choice>
      <xs:attribute name='start' type='xs:dateTime' use='required'/>
      <xs:attribute name='subject' type='xs:string' use='optional'/>
      <xs:attribute name='thread' use='optional' type='xs:string'/>
      <xs:attribute name='version' use='optional' type='xs:nonNegativeInteger'/>
      <xs:attribute name='with' type='xs:string' use='required'/>
    </xs:complexType>
  </xs:element>

  <xs:complexType name='messageType'>
    <xs:sequence>
      <xs:element name='body' type='xs:string' minOccurs='0' maxOccurs='unbounded'/>
      <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
    </xs:sequence>
    <xs:attribute name='jid' type='xs:string' use='optional'/>
    <xs:attribute name='name' type='xs:string' use='optional'/>
    <xs:attribute name='secs' type='xs:nonNegativeInteger' use='optional'/>
    <xs:attribute name='utc' type='xs:dateTime' use='optional'/>
  </xs:complexType>

  <xs:complexType name='linkType'>
    <xs:simpleContent>
      <xs:extension base='empty'>
        <xs:attribute name='start' type='xs:dateTime' use='optional'/>
        <xs:attribute name='with' type='xs:string' use='optional'/>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>

  <xs:element name='default'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='expire' type='xs:nonNegativeInteger' use='optional'/>
          <xs:attribute name='otr' use='required'>
            <xs:simpleType>
              <xs:restriction base='xs:NCName'>
                <xs:enumeration value='approve'/>
                <xs:enumeration value='concede'/>
                <xs:enumeration value='forbid'/>
                <xs:enumeration value='oppose'/>
                <xs:enumeration value='prefer'/>
                <xs:enumeration value='require'/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
          <xs:attribute name='save' use='required'>
            <xs:simpleType>
              <xs:restriction base='xs:NCName'>
                <xs:enumeration value='body'/>
                <xs:enumeration value='false'/>
                <xs:enumeration value='message'/>
                <xs:enumeration value='stream'/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
          <xs:attribute name='unset' use='optional' type='xs:boolean'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='delete'>
    <xs:complexType>
      <xs:sequence>
        <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:attribute name='start' type='xs:dateTime' use='required'/>
      <xs:attribute name='with' type='xs:string' use='required'/>
    </xs:complexType>
  </xs:element>

  <xs:element name='feature'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='default' minOccurs='0' maxOccurs='1'/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:element name='item'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='expire' type='xs:nonNegativeInteger' use='optional'/>
          <xs:attribute name='jid' use='required' type='xs:string'/>
          <xs:attribute name='otr' use='required'>
            <xs:simpleType>
              <xs:restriction base='xs:NCName'>
                <xs:enumeration value='approve'/>
                <xs:enumeration value='concede'/>
                <xs:enumeration value='forbid'/>
                <xs:enumeration value='oppose'/>
                <xs:enumeration value='prefer'/>
                <xs:enumeration value='require'/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
          <xs:attribute name='save' use='required'>
            <xs:simpleType>
              <xs:restriction base='xs:NCName'>
                <xs:enumeration value='body'/>
                <xs:enumeration value='false'/>
                <xs:enumeration value='message'/>
                <xs:enumeration value='stream'/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='keys'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='chat' minOccurs='0' maxOccurs='unbounded'/>
        <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:element name='list'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='chat' minOccurs='0' maxOccurs='unbounded'/>
        <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:attribute name='end' type='xs:dateTime' use='optional'/>
      <xs:attribute name='start' type='xs:dateTime' use='optional'/>
      <xs:attribute name='with' type='xs:string' use='optional'/>
    </xs:complexType>
  </xs:element>

  <xs:element name='method'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='type' type='xs:string' use='required'/>
          <xs:attribute name='use' use='required'>
            <xs:simpleType>
              <xs:restriction base='xs:NCName'>
                <xs:enumeration value='concede'/>
                <xs:enumeration value='forbid'/>
                <xs:enumeration value='prefer'/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='modified'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='changed' minOccurs='0' maxOccurs='unbounded'/>
        <xs:element ref='removed' minOccurs='0' maxOccurs='unbounded'/>
        <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:attribute name='start' type='xs:dateTime' use='required'/>
    </xs:complexType>
  </xs:element>

  <xs:element name='note'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='xs:string'>
          <xs:attribute name='utc' type='xs:dateTime' use='optional'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='pref'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='auto' minOccurs='0' maxOccurs='1'/>
        <xs:element ref='default' minOccurs='0' maxOccurs='1'/>
        <xs:element ref='item' minOccurs='0' maxOccurs='unbounded'/>
        <xs:element ref='method' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:element name='itemremove'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='item' minOccurs='1' maxOccurs='unbounded'/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:element name='remove'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='end' type='xs:dateTime' use='optional'/>
          <xs:attribute name='open' use='optional' type='xs:boolean'/>
          <xs:attribute name='start' type='xs:dateTime' use='required'/>
          <xs:attribute name='with' type='xs:string' use='required'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='removed'>
    <xs:complexType>
      <xs:simpleContent>
        <xs:extension base='empty'>
          <xs:attribute name='start' type='xs:dateTime' use='required'/>
          <xs:attribute name='with' type='xs:string' use='required'/>
          <xs:attribute name='version' type='xs:nonNegativeInteger' use='required'/>
        </xs:extension>
      </xs:simpleContent>
    </xs:complexType>
  </xs:element>

  <xs:element name='retrieve'>
    <xs:complexType>
      <xs:sequence>
        <xs:any processContents='lax' namespace='##other' minOccurs='0' maxOccurs='unbounded'/>
      </xs:sequence>
      <xs:attribute name='start' type='xs:dateTime' use='required'/>
      <xs:attribute name='with' type='xs:string' use='required'/>
    </xs:complexType>
  </xs:element>

  <xs:element name='save'>
    <xs:complexType>
      <xs:sequence>
        <xs:element ref='chat' minOccurs='1' maxOccurs='1'/>
      </xs:sequence>
    </xs:complexType>
  </xs:element>

  <xs:simpleType name='empty'>
    <xs:restriction base='xs:string'>
      <xs:enumeration value=''/>
    </xs:restriction>
  </xs:simpleType>

</xs:schema>

16. Acknowledgements

Thanks to Alexey Melnikov and Alexander Tsvyashchenko for their comments and suggestions.

Notes

1. The "OTR" mode for message archiving is not to be confused with the "OTR" technology for "off-the-record communications" described at <http://www.cypherpunks.ca/otr/>.

2. In accordance with Section 3.2.2.1 of XML Schema Part 2: Datatypes, the allowable lexical representations for the xs:boolean datatype are the strings "0" and "false" for the concept 'false' and the strings "1" and "true" for the concept 'true'; implementations MUST support both styles of lexical representation.

3. Stream compression typically does not mitigate bandwidth and storage issues since clients running in constrained runtime environments typically cannot take advantage of stream compression (no binary data, only XML, may be transfered).

4. If a client (or user) acts in bad faith then its contacts cannot prevent it from archiving conversations.

5. XEP-0082: XMPP Date and Time Profiles <http://www.xmpp.org/extensions/xep-0082.html>.

6. XEP-0201: Best Practices for Message Threads <http://www.xmpp.org/extensions/xep-0201.html>.

7. In accordance with Section 3.2.2.1 of XML Schema Part 2: Datatypes, the allowable lexical representations for the xs:boolean datatype are the strings "0" and "false" for the concept 'false' and the strings "1" and "true" for the concept 'true'; implementations MUST support both styles of lexical representation.

8. XEP-0116: Encrypted Session Negotiation <http://www.xmpp.org/extensions/xep-0116.html>.

9. XEP-0241: Encryption of Archived Messages <http://www.xmpp.org/extensions/xep-0241.html>.

10. XEP-0045: Multi-User Chat <http://www.xmpp.org/extensions/xep-0045.html>.

11. XEP-0004: Data Forms <http://www.xmpp.org/extensions/xep-0004.html>.

12. XEP-0116: Encrypted Session Negotiation <http://www.xmpp.org/extensions/xep-0116.html>.

13. XEP-0059: Result Set Management <http://www.xmpp.org/extensions/xep-0059.html>.

14. Clients that run in constrained environments may not be able to implement replication if they are prevented from accessing (sufficient) local storage.

15. Since collections SHOULD be stored on the server in a form that it cannot decrypt, server-side searching of the content of messages is beyond the scope of this protocol.

16. XEP-0030: Service Discovery <http://www.xmpp.org/extensions/xep-0030.html>.

17. XEP-0202: Entity Time <http://www.xmpp.org/extensions/xep-0202.html>.

18. XEP-0155: Stanza Session Negotiation <http://www.xmpp.org/extensions/xep-0155.html>.

19. XEP-0131: Stanza Headers and Internet Metadata <http://www.xmpp.org/extensions/xep-0131.html>.

20. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols, such as port numbers and URI schemes. For further information, see <http://www.iana.org/>.

21. The XMPP Registrar maintains a list of reserved protocol namespaces as well as registries of parameters used in the context of XMPP extension protocols approved by the XMPP Standards Foundation. For further information, see <http://www.xmpp.org/registrar/>.

22. XEP-0053: XMPP Registrar Function <http://www.xmpp.org/extensions/xep-0053.html>.

Revision History

Version 0.17 (2008-04-30)

Split encryption content off into new specification.

(psa)

Version 0.16 (2008-04-15)

Addressed last call comments; clarified syntax of the pref and chat elements; deferred definition of data forms for attribute association to future specifications; removed registration of field standardization fields.

(psa)

Version 0.15 (2008-03-03)

Changed temporary namespace per XEP-0053 procedures; moved all encrypted-related material to dedicated section; removed text about file format; modified replication to use start attribute, not after element; added version attribute for tracking collection changes; added itemremove element to delete all preferences for a contact.

(psa)

Version 0.14 (2007-08-16)

Clarified text regarding preference syntax; completed copy edit.

(psa)

Version 0.13 (2007-01-08)

Harmonized stanza session negotiation of message logging settings with XEP-0155; defined stream feature.

(psa/ip)

Version 0.12 (2006-11-23)

All modes allow multiple body children of to and from elements; changed namespace and collection element name to chat; renamed all value of save attribute to message; added stream value of the save attribute, thread attribute, save wrapper element, and Linking Collections and Associating Attributes sections

(ip)

Version 0.11 (2006-11-06)

Added more otr attribute values and clarified their meanings, changed the names of the use attribute values

(ip)

Version 0.10 (2006-10-11)

Added auto-archiving warning for legacy clients; corrected examples

(ip)

Version 0.9 (2006-10-02)

Added method child elements and expire attribute to pref element

(ip)

Version 0.8 (2006-09-29)

Server generates encryption secrets for auto-archiving; specified use of W3C XML Encryption standard; enabled replacement of keys encrypted with an obsolete public key; enabled removal of open collections

(ip)

Version 0.7 (2006-09-08)

Added preferences, results set management and notes; reinstated encryption and replication; simplified auto-archiving and off-the-record (with XEP-0155); many minor changes

(ip)

Version 0.6 (2006-08-18)

Added unset value for save attribute and added service attribute on default element; added source attribute on record element; specified that services should (not must) support save mode for particular contacts.

(jp/psa)

Version 0.5 (2006-05-03)

Integrated text from server-side archiving proposal; added partial support to collection retrieval; harmonized XML formats and namespaces; defined XMPP Registrar considerations and XML schema.

(psa/jp/jk)

Version 0.4 (2005-12-21)

Added Replication and Searching section, partial attribute; minor improvements

(ip)

Version 0.3 (2005-10-21)

Added more examples to Removing Collections

(ip)

Version 0.2 (2005-04-18)

Complete rewrite.

(ip)

Version 0.1 (2004-06-04)

Initial version.

(jk)

XEP-0136: Message Archiving

Document Information

Author Information

Ian Paterson

Jon Perlow

Peter Saint-Andre

Justin Karneges

Legal Notices

Copyright

Permissions

Disclaimer of Warranty

Limitation of Liability

IPR Conformance

Discussion Venue

Relation to XMPP

Conformance Terms

Table of Contents

1. Introduction

2. Archiving Preferences

2.1 Introduction

2.2 Preference Syntax

2.2.1 Auto Element

2.2.2 Default Element

2.2.2.1 expire Attribute

2.2.2.2 otr Attribute

2.2.2.3 save Attribute

2.2.3 Item Element

2.2.3.1 expire Attribute

2.2.3.2 jid Attribute

2.2.3.3 otr Attribute

2.2.3.4 save Attribute

2.2.4 Method Element

2.2.4.1 type Attribute

2.2.4.2 use Attribute

2.3 Determining Preferences

2.4 Setting Default Modes

2.5 Setting Modes for a Contact

2.6 Setting Archiving Method Preferences

3. Off The Record

3.1 OTR Negotiation

3.2 Notes

4. Collections: The Chat Element

4.1 start Attribute

4.2 subject Attribute

4.3 thread Attribute

4.4 version Attribute

4.5 with Attribute

4.6 from and to Elements

4.7 note Element

5. Manual Archiving

5.1 Introduction

5.2 Uploading Messages to a Collection

5.3 Changing the Subject of a Collection

5.4 Offline Messages

5.5 Groupchat Messages

5.6 Linking Collections

5.7 Associating Attributes with a Collection

6. Automatic Archiving

7. Archive Management

7.1 Retrieving a List of Collections

7.2 Retrieving a Collection

7.3 Removing a Collection

8. Replication

9. Determining Server Support

10. Implementation Notes

10.1 Time Synchronization

10.2 Bandwidth Considerations

10.3 Storage Considerations

11. Stream Feature

12. Security Considerations

12.1 Automatic Archiving Defaulting to On

12.2 Store Headers

13. IANA Considerations

14. XMPP Registrar Considerations

14.1 Protocol Namespace

14.2 Service Discovery Features

15. XML Schema

16. Acknowledgements

Notes

Revision History