XEP-0156: A DNS TXT Resource Record Format for XMPP Connection Methods

This document defines a DNS TXT Resource Record format for use in specifying methods of connecting to an XMPP server.

WARNING: This Standards-Track document is Experimental. Publication as an XMPP Extension Protocol does not imply approval of this proposal by the XMPP Standards Foundation. Implementation of the protocol described herein is encouraged in exploratory implementations, but production systems should not deploy implementations of this protocol until it advances to a status of Draft.

Document Information

Series: XEP
Number: 0156
Publisher: XMPP Standards Foundation
Status: Experimental
Type: Standards Track
Version: 0.5
Last Updated: 2007-01-30
Approving Body: XMPP Council
Dependencies: XMPP Core, RFC 1464
Supersedes: None
Superseded By: None
Short Name: N/A
Wiki Page: <http://wiki.jabber.org/index.php/A DNS TXT Resource Record Format for XMPP Connection Methods (XEP-0156)>

Author Information

Legal Notice

This XMPP Extension Protocol is copyright 1999 - 2007 by the XMPP Standards Foundation (XSF) and is in full conformance with the XSF's Intellectual Property Rights Policy <http://www.xmpp.org/extensions/ipr-policy.shtml>. This material may be distributed only subject to the terms and conditions set forth in the Creative Commons Attribution License (<http://creativecommons.org/licenses/by/2.5/>).

Discussion Venue

The preferred venue for discussion of this document is the Standards discussion list: <http://mail.jabber.org/mailman/listinfo/standards>.

Given that this XMPP Extension Protocol normatively references IETF technologies, discussion on the XSF-IETF list may also be appropriate (see <http://mail.jabber.org/mailman/listinfo/jsf-ietf> for details).

Relation to XMPP

The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 3920) and XMPP IM (RFC 3921) specifications contributed by the XMPP Standards Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this document has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.

Conformance Terms

The following keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".

Table of Contents

1. Introduction

Although RFC 3920 [1] specifies the use of TCP as the method of connecting to an XMPP server, other connection methods are possible. These include the HTTP Binding [2] method, the Jabber HTTP Polling [3] method (now deprecated), and less common methods such as Wireless Access Protocol (WAP) [4]. For some of these methods, it is necessary to discover further parameters before connecting, such as the HTTP URL of an alternative connection manager. Currently, if a client application needs to discover connection methods before connecting to an XMPP service, the relevant information must be provided manually by a human user, which is cumbersome and error-prone. Thankfully, there are several potential ways to complete this pre-connection service discovery in an automated fashion:

1. Specify a WSDL [5] definition (or other XML file format) and a canonical URL for that definition at a domain that offers XMPP services. Unfortunately, this approach requires access to the HTTP server for the domain (and quite possibly to the root directory thereof), which may be difficult for XMPP server administrators to arrange. In addition, it requires a client to retrieve the relevant file via HTTP before performing DNS lookups and XMPP connection; it would be more efficient to use recognized DNS methods since DNS lookups are already required by RFC 3920.

2. Specify a way to define the required service discovery information as part of the existing DNS SRV records (see RFC 2782 [6]) for a domain that offers XMPP services. While this approach sounds promising, it is not feasible since the DNS SRV Target field can be used only to specify domain names and cannot be used to specify full URIs (such as the URL for an HTTP connection manager).

3. Specify a way to define the required service discovery using the "straightforward NAPTR" (S-NAPTR) profile of the Dynamic Delegation Discovery System (see RFC 3958 [7] and RFC 3401 [8]). Unfortunately, S-NAPTR also does not allow inclusion of full URIs, and thus does not meet the requirements for discovery of XMPP connection methods.

4. Specify a way to define the required service discovery using the "URI-enabled NAPTR" (U-NAPTR) profile of the Dynamic Delegation Discovery System (see U-NAPTR [9]). While this is a valid approach that is worth pursuing, the authors are concerned about the deployability of such an approach given the rarity of support for DDDS and U-NAPTR, especially in client-side applications (the main focus of this specification).

5. Specify a way to define the required service discovery information via properly-formatted DNS TXT records (see RFC 1464 [10]). While this approach requires an update to the DNS records for the server domain, that is usually necessary in order to establish XMPP services in the first place. Furthermore, although there are some perils to be avoided in the use of DNS TXT records (e.g., wildcards), the technology is well understood and widely deployed (e.g., it is used by the Sender Policy Framework and SenderID email server verification technologies).

Therefore this document defines a way to encapsulate information about XMPP connection methods in DNS TXT resource records. However, the authors will monitor the availability of DDDS-based systems and may request that the methods defined in this document be deprecated at some point in the future.

The discovery mechanism specified herein MAY also be used to define the ports at which standard XMPP TCP services are offered; this is especially useful when XMPP service administrators do not have access to SRV records (e.g., because many DNS services do not yet support SRV records). However, any values (e.g., port numbers) presented via SRV records MUST be taken as canonical and MUST supersede values provided via TXT records.

2. Record Format

The following format for DNS TXT resource records is specified in RFC 1464:

  <owner> <class> <ttl> <TXT> <"attribute name=attribute value">
  

This document specifies that the following additional rules apply for DNS TXT resource records used to specify XMPP connection methods:

1. It is RECOMMENDED for the owner to be "_xmppconnect".
2. The class field SHOULD be IN.
3. The ttl field is OPTIONAL.
4. The attribute name SHOULD begin with the string "_xmpp-client-" or "_xmpp-server-" and SHOULD be registered as described in the XMPP Registrar Considerations section of this document.
5. If the txt-data field contains only an attribute name (i.e., no unquoted "=" character followed by additional characters), the receiving application SHOULD interpret it as indicating the presence of the attribute or feature with no defined value.
6. If the txt-data field contains an unquoted "=" character, it MUST also contain an attribute value.

3. Business Rules

The following business rules apply:

1. TXT lookups MUST be used only as a fallback after the methods specified in RFC 3920 have been exhausted.
2. A domain SHOULD NOT present information in DNS TXT records that is available via the DNS SRV records defined in RFC 3920.
3. The order of DNS TXT records SHOULD NOT be interpreted as significant by the presenting domain or the receiving entity.

4. Examples

The following examples show three DNS TXT resource records: the first indicates support for the httpbind connection method defined in XEP-0124 including the appropriate URL, the second indicates support for the httppoll connection method defined in XEP-0025 including the appropriate URL, and the third indicates support for WAP connections including the appropriate URL, the fourth indicates support for client connections at TCP port 5222, and the fifth indicates support for server connections at TCP port 5269.

Example 1. TXT Resource Records

_xmppconnect IN TXT "_xmpp-client-httpbind=https://web.jabber.org:8080/bind.cgi"
_xmppconnect IN TXT "_xmpp-client-wap=http://wap.jabber.org/connector.cgi"
_xmppconnect IN TXT "_xmpp-client-tcp=5222"
_xmppconnect IN TXT "_xmpp-server-tcp=5269"
  

Note: These examples are included for the sake of completeness. As mentioned, use of the "_xmpp-client-tcp" and "_xmpp-server-tcp" attributes is discouraged, since SRV records are preferred.

5. Security Considerations

It is possible that advertisement of connection methods other than the standard TCP connection method may introduce security vulnerabilities, since a connecting entity (usually a client) might deliberately seek to connect using the method with the weakest security mechanisms (e.g., no channel encryption or relatively weak authentication). Care must be taken in determining which connection methods are appropriate to advertise.

6. IANA Considerations

This document requires no interaction with the Internet Assigned Numbers Authority (IANA) [11].

7. XMPP Registrar Considerations

<attribute>
  <name>the name of the attribute</name>
  <desc>a natural-language description of the connection method</desc>
  <value>the syntax or datatype of the attribute value</value>
  <doc>the document in which the connection method is specified</doc>
</attribute>
      

<attribute>
  <name>_xmpp-client-httpbind</name>
  <desc>the HTTP Binding connection method</desc>
  <value>the http: or https: URL at which to contact the HTTP Binding connection manager or proxy</value>
  <doc>XEP-0124</doc>
</attribute>

<attribute>
  <name>_xmpp-client-httppoll</name>
  <desc>the HTTP Polling connection method</desc>
  <value>the http: or https: URL at which to contact the HTTP Polling connection manager or proxy</value>
  <doc>XEP-0025</doc>
</attribute>

<attribute>      
  <name>_xmpp-client-tcp</name>         
  <desc>standard client-to-server TCP connection method (usually on port 5222)</desc>    
  <value>may contain the port number (however, this should be discovered via SRV)</value>       
  <doc>RFC 3920</doc>   
</attribute>

<attribute>      
  <name>_xmpp-server-tcp</name>         
  <desc>standard server-to-server TCP connection method (usually on port 5269)</desc>    
  <value>may contain the port number (however, this should be discovered via SRV)</value>       
  <doc>RFC 3920</doc>   
</attribute>
      

Notes

Revision History

END