| Abstract: | This specification defines a Jingle transport method that results in sending data via the SOCKS5 Bytestreams (S5B) protocol defined in XEP-0065. Essentially this transport method reuses XEP-0065 semantics for sending the data and defines native Jingle methods for starting and ending an S5B session. |
| Authors: | Peter Saint-Andre, Dirk Meyer, Justin Karneges, Marcus Lundblad, Klaus Hartke |
| Copyright: | © 1999 - 2011 XMPP Standards Foundation. SEE LEGAL NOTICES. |
| Status: | Experimental |
| Type: | Standards Track |
| Version: | 0.5 |
| Last Updated: | 2010-04-13 |
WARNING: This Standards-Track document is Experimental. Publication as an XMPP Extension Protocol does not imply approval of this proposal by the XMPP Standards Foundation. Implementation of the protocol described herein is encouraged in exploratory implementations, but production systems are advised to carefully consider whether it is appropriate to deploy implementations of this protocol before it advances to a status of Draft.
1. Introduction
2. Protocol
2.1. Selecting Candidates
2.2. Exchanging Candidates
2.3. Connecting to Candidates
2.4. Completing the Negotiation
2.5. Exchanging Data
2.6. Closing the Bytestream
3. Fallback Methods
4. Processing Rules and Usage Guidelines
5. Determining Support
6. Security Considerations
6.1. Sharing IP Addresses
6.2. Encryption of Media
7. IANA Considerations
8. XMPP Registrar Considerations
8.1. Jingle Transport Methods
9. Schema
Appendices
A: Document Information
B: Author Information
C: Legal Notices
D: Relation to XMPP
E: Discussion Venue
F: Requirements Conformance
G: Notes
H: Revision History
Jingle [1] defines a framework for negotiating and managing data sessions over XMPP. In order to provide a flexible framework, the base Jingle specification defines neither data transport methods nor application formats, leaving that up to separate specifications. The current document defines a transport method for establishing and managing data exchanges between XMPP entities using the existing SOCKS5 Bytestreams (S5B) protocol specified in SOCKS5 Bytestreams [2]. This "jingle-s5b" method results in a streaming transport method suitable for use in Jingle application types where packet loss cannot be tolerated (e.g., file transfer). Jingle-S5B reuses the protocol flow from XEP-0065 for the communication with a SOCKS5 streamhost; the communication between two clients to negotiate the possible candidates differs from XEP-0065 and shares similarities with Jingle ICE-UDP Transport Method [3]
Initiator Responder | | | session-initiate | | (with S5B candidates) | |--------------------------------->| | ack | |<---------------------------------| | session-accept | | (with S5B candidates) | |<---------------------------------| | ack | |--------------------------------->| | candidate-used transport-info | |<---------------------------------| | ack | |--------------------------------->| | candidate-used transport-info | |--------------------------------->| | ack | |<---------------------------------| | S5B "SESSION" | |<================================>| | session-terminate | |<---------------------------------| | ack | |--------------------------------->| | |
This flow is illustrated in the following examples (to simplify the presentation these use an "example" application instead of a real application type).
It is RECOMMENDED that a client will offer as many <candidate/> elements as possible with itself as the host (i.e., non-proxy candidates). Such candidates might be found using the following methods:
If the client knows it is behind a NAT and the router announces UPnP IGD or NAT-PMP support, the client SHOULD map the open port to the external interface of the router and include the public IP address and port information in the <candidate/> offers. To increase the chance of success without using a proxy, this specification encourages the responder to also send offers, effectively equivalent to the "fast-mode" for SOCKS5 Bytestreams as previously described at <http://delta.affinix.com/specs/stream.html>.
Once the initiator has a set of candidates, it sends a Jingle session-initiate request that contains one or more transport candidates which are a mixture of XEP-0065 streamhosts and ICE candidates used in XEP-0176.
Example 1. Initiator sends session-initiate
<iq from='romeo@montague.lit/orchard'
id='xn28s7gk'
to='juliet@capulet.lit/balcony'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='session-initiate'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<description xmlns='urn:xmpp:example'/>
<transport xmlns='urn:xmpp:jingle:transports:s5b:1'
mode='tcp'
sid='vj3hs98y'>
<candidate cid='hft54dqy'
host='192.168.4.1'
jid='romeo@montague.lit/orchard'
port='5086'
priority='8257636'
type='direct'/>
<candidate cid='hutr46fe'
host='24.24.24.1'
jid='romeo@montague.lit/orchard'
port='5087'
priority='8258636'
type='direct'/>
</transport>
</content>
</jingle>
</iq>
The responder immediately acknowledges receipt.
Example 2. Responder acknowledges session-initiate
<iq from='juliet@capulet.lit/balcony'
id='xn28s7gk'
to='romeo@montague.lit/orchard'
type='result'/>
Depending on the application type, a user agent controlled by a human user might need to wait for the user to affirm a desire to proceed with the session before continuing. When the user agent has received such affirmation (or if the user agent can automatically proceed for any reason, e.g. because no human intervention is expected or because a human user has configured the user agent to automatically accept sessions with a given entity), it returns a Jingle session-accept message. This message MUST contain a <transport/> element qualified by the 'urn:xmpp:jingle:transports:s5b:1' namespace, which SHOULD in turn contain one <candidate/> element for each SOCKS5 Bytestreams candidate generated by or known to the responder, but MAY instead be empty if the responder does not wish to offer any candidates or wishes to send each candidate as the payload of a transport-info message.
If the responder sends candidates in the session-accept, the chances of a successful connection are increased. For example, the initiator might be behind a NAT or might have no access to an S5B proxy, whereas the responder might have a public IP address, might know about a proxy, or might have NAT penetration support like NAT-PMP in a router. However, the responder MUST NOT offer as a candidate any host/port combination that has already been offered by the initiator; this helps to prevent failure of negotiation with S5B proxies.
In the following example, Juliet's client opens one port. The provided candidates are the (private) IPv4 address of the interface, a (public) IPv6 address, and the public IPv4 address created by mapping the private IP address/port using NAT-PMP.
Example 3. Responder sends session-accept with candidates
<iq from='juliet@capulet.lit/balcony'
id='hwd987h'
to='romeo@montague.lit/orchard'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='session-accept'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<description xmlns='urn:xmpp:example'/>
<transport xmlns='urn:xmpp:jingle:transports:s5b:1'
mode='tcp'
sid='vj3hs98y'>
<candidate cid='ht567dq'
host='192.169.1.10'
jid='juliet@capulet.lit/balcony'
port='6539'
priority='8257636'
type='direct'/>
<candidate cid='hr65dqyd'
host='134.102.201.180'
jid='juliet@capulet.lit/balcony'
port='16453'
priority='7929856'
type='assisted'/>
<candidate cid='grt654q2'
host='2001:638:708:30c9:219:d1ff:fea4:a17d'
jid='juliet@capulet.lit/balcony'
port='6539'
priority='8257606'
type='direct'/>
</transport>
</content>
</jingle>
</iq>
The initiator acknowledges receipt and tries to connect to the offered candidates.
Example 4. Initiator acknowledges session-accept
<iq from='romeo@montague.lit/orchard'
id='hwd987h'
to='juliet@capulet.lit/balcony'
type='result'/>
A client SHOULD check the offered candidates in order of their priority, starting with the highest value. How the priority is calculated depends on the actual available interfaces. An implementation SHOULD use the following formula:
priority = (2^16)*(type preference) + (local preference)
The type preference is an integer value between 0 and 127. The following types and their suggested preference values are defined.
| Type | Description | Preference Value |
|---|---|---|
| direct | Direct connection using the given interface | 126 |
| assisted | Direct connection using NAT assisting technologies like NAT-PMP or UPnP-IGD | 120 |
| tunnel | Tunnel protocols such as Teredo | 110 |
| proxy | SOCKS5 Relay | 10 |
The local preference is used to rate different candidates of the same type, e.g. a DSL link might be preferred over a VPN connection. The value of the local preference SHOULD be between 0 and 65535. The proposed values are only guidelines. If a client wants to increase or decrease the value of a specific candidate it is free to do so. For instance, a client might have an expensive UMTS link as a last resort and might rate this link lower than all SOCKS5 relays.
After receiving its peer's candidates, a client start to connect to them in order of the priority. The protocol is described in XEP-0065 in detail. Once one client has successfully created a connection, it sends the <candidate-used/> element to the peer inside a Jingle transport-info message. If a client receives a candidate-used notification it SHOULD continue trying to connect to candidates sent by its peer if it has not tried all candidates with a higher priority than the one successfully used by the peer.
Example 5. Initiator sends candidate-used in Jingle transport-info
<iq from='romeo@montague.lit/orchard'
id='hjdi8'
to='juliet@capulet.lit/balcony'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='transport-info'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<transport xmlns='urn:xmpp:jingle:transports:s5b:1'
sid='vj3hs98y'>
<candidate-used cid='hr65dqyd'/>
</transport>
</content>
</jingle>
</iq>
The peer immediately acknowledges receipt.
Example 6. Responder acknowledges candidate-used message
<iq from='juliet@capulet.lit/balcony'
id='hjdi8'
to='romeo@montague.lit/orchard'
type='result'/>
If a client is unable to connect to any candidate sent by its peer, or if it stopped trying to connect because its peer sent a candidate-used notification with a priority higher than its remaining candidate(s), it sends a candidate-error Jingle transport-info message (this is equivalent to the IQ-error with code='500' from the "fast-mode" extension).
Example 7. Responder sends candidate-error in Jingle transport-info
<iq from='juliet@capulet.lit/balcony'
id='gft65ewd'
to='romeo@montague.lit/orchard'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='transport-info'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<transport xmlns='urn:xmpp:jingle:transports:s5b:1'
sid='vj3hs98y'>
<candidate-error/>
</transport>
</content>
</jingle>
</iq>
The peer immediately acknowledges receipt.
Example 8. Responder acknowledges candidate-error message
<iq from='romeo@montague.lit/orchard'
id='gft65ewd'
to='juliet@capulet.lit/balcony'
type='result'/>
The transport negotiation is completed in one of the following ways:
The parties shall use the nominated candidate for the data transfer. If the nominated candidate is of the proxy type, then the peer has no way to know when it can send data. Therefore the party that offered the nominated candidate MUST send an activated notification to the peer once it has activated the bytestream (as described in XEP-0065); it does so by sending a transport-info message containing an <activated/> element as follows.
Example 9. Responder informs initiator that bytestream has been activated
<iq from='juliet@capulet.lit/balcony'
id='bv73bs91'
to='romeo@montague.lit/orchard'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='transport-info'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<transport xmlns='urn:xmpp:jingle:transports:s5b:1'
sid='vj3hs98y'>
<activated cid='xmdh4b7i'/>
</transport>
</content>
</jingle>
</iq>
If the nominated candidate is of the proxy type and either party cannot connect to the proxy (for example because of a restrictive firewall), the failing party shall send a transport-info message containing an <proxy-error/> element.
Example 10. Responder informs initiator of inability to connect to the proxy
<iq from='juliet@capulet.lit/balcony'
id='bv73bs91'
to='romeo@montague.lit/orchard'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='transport-info'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<transport xmlns='urn:xmpp:jingle:transports:s5b:1'
sid='vj3hs98y'>
<proxy-error/>
</transport>
</content>
</jingle>
</iq>
The parties shall then consider the bytestream unsuccessful and SHOULD attempt to fall back to another transport as described in Fallback Methods.
Once the parties have chosen (and if necessary activated) a streamhost, they can exchange data as defined in XEP-0065.
Once the parties have finished using the bytestream (e.g., because a complete file has been sent), either party can send a Jingle session-terminate action.
Example 11. Initiator terminates the session
<iq from='romeo@montague.lit/orchard'
id='hz81vf48'
to='juliet@capulet.lit/balcony'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='session-terminate'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<reason><success/></reason>
</jingle>
</iq>
The other party then acknowledges the session-terminate and the Jingle session is finished.
Example 12. Responder acknowledges session-terminate
<iq from='juliet@capulet.lit/balcony'
id='hz81vf48'
to='romeo@montague.lit/orchard'
type='result'/>
If the SOCKS5 Bytestreams negotiation fails, the parties might want to "fall back" to the transport of last resort, which for a streaming transport is typically In-Band Bytestreams [4] as described for Jingle in Jingle In-Band Bytestreams Transport Method [5]. The protocol flow is as follows.
Romeo Juliet | | | session-initiate | | (with S5B info) | |--------------------------------->| | ack | |<---------------------------------| | session-accept | | (with S5B info) | |<---------------------------------| | [ SOCKS5 failure! ] | |x--------------------------------x| | transport-replace (IBB) | |--------------------------------->| | ack | |<---------------------------------| | transport-accept (IBB) | |<---------------------------------| | ack | |--------------------------------->| | IBB "SESSION" | |=================================>| | terminate | |<---------------------------------| | ack | |--------------------------------->| | |
First the initiator sends a Jingle session-initiate, in this case with a transport of SOCKS5 Bytestreams. The protocol flow is exactly the same as described above. If both parties are unable to connect to a candidate provided by the peer, they send candidate-error messages to indicate that SOCKS5 has failed. The initiator MUST either terminate the Jingle session with a Jingle reason of <connectivity-error/> or replace the transport with something else using the transport-replace action. Typically the fallback option is IBB (see, for example, Jingle File Transfer [6]). Therefore the initiator sends a transport-replace action including a transport of IBB.
Example 13. Initiator replaces transport with IBB
<iq from='romeo@montague.lit/orchard'
id='hs92n57'
to='juliet@capulet.lit/balcony'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='transport-replace'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<transport xmlns='urn:xmpp:jingle:transports:ibb:1'
block-size='4096'
sid='ch3d9s71'/>
</content>
</jingle>
</iq>
The responder then acknowledges the transport-replace action.
Example 14. Responder acknowledges transport-replace
<iq from='juliet@capulet.lit/balcony'
id='hs92n57'
to='romeo@montague.lit/orchard'
type='result'/>
If the transport replacement is acceptable, the responder then sends a transport-accept action to the initiator (if not, the responder sends a transport-reject action). If the responder wishes to use a smaller block size than the one specified in the transport-replace offer, this can be done by specifying a block-size attribute in the transport-accept action.
Example 15. Responder sends transport-accept
<iq from='juliet@capulet.lit/balcony'
id='is71ns63'
to='romeo@montague.lit/orchard'
type='set'>
<jingle xmlns='urn:xmpp:jingle:1'
action='transport-accept'
initiator='romeo@montague.lit/orchard'
sid='a73sjjvkla37jfea'>
<content creator='initiator' name='ex'>
<transport xmlns='urn:xmpp:jingle:transports:ibb:1'
block-size='2048'
sid='ch3d9s71'/>
</content>
</jingle>
</iq>
The initiator acknowledges the Jingle transport-accept action.
Example 16. Initiator acknowledges transport-accept
<iq from='juliet@capulet.lit/balcony'
id='is71ns63'
to='romeo@montague.lit/orchard'
type='result'/>
Now the parties can send data using In-Band Bytestreams as defined in XEP-0047.
The same processing rules and usage guidelines defined in XEP-0065 apply to the Jingle S5B Transport Method. Additional implementation suggestions are:
To advertise its support for the Jingle SOCKS5 Bytestreams Transport Method, when replying to Service Discovery [7] information requests an entity MUST return URNs for any version of this protocol that the entity supports -- e.g., "urn:xmpp:jingle:transports:s5b:1" for this version (see Namespace Versioning regarding the possibility of incrementing the version number).
Example 17. Service discovery information request
<iq from='romeo@montague.lit/orchard'
id='uw72g176'
to='juliet@capulet.lit/balcony'
type='get'>
<query xmlns='http://jabber.org/protocol/disco#info'/>
</iq>
Example 18. Service discovery information response
<iq from='juliet@capulet.lit/balcony'
id='uw72g176'
to='romeo@montague.lit/orchard'
type='result'>
<query xmlns='http://jabber.org/protocol/disco#info'>
<feature var='urn:xmpp:jingle:1'/>
<feature var='urn:xmpp:jingle:transports:s5b:1'/>
</query>
</iq>
In order for an application to determine whether an entity supports this protocol, where possible it SHOULD use the dynamic, presence-based profile of service discovery defined in Entity Capabilities [8]. However, if an application has not received entity capabilities information from an entity, it SHOULD use explicit service discovery instead.
The exchange of candidates might result in exposure of the sender's IP addresses, which comprise a form of personally identifying information. A Jingle client MUST enable a user to control which entities will be allowed to receive such information. If a human user explicitly accepts a session request, then the client SHOULD consider that action to imply approval of IP address sharing. However, waiting for a human user to explicitly accept the session request can result in delays during session setup, since it is more efficient to immediately begin sharing transport candidates. Therefore, it is RECOMMENDED for the client to immediately send transport candidates to a contact (without waiting for explicit user approval of the session request) in the following cases:
A Jingle implementation SHOULD support security preconditions that are enforced before application media is allowed to flow over the bytestream, such as those described in Jingle XTLS [10].
This document requires no interaction with the Internet Assigned Numbers Authority (IANA) [11].
The XMPP Registrar [12] shall add to its registry of Jingle transport methods a definition for the "jingle-s5b" transport method. The registry submission is as follows:
<transport>
<name>s5b</name>
<desc>
A method for negotiating data exchange over SOCKS5 Bytestreams.
</desc>
<type>streaming</type>
<doc>XEP-0260</doc>
</transport>
<?xml version='1.0' encoding='UTF-8'?>
<xs:schema
xmlns:xs='http://www.w3.org/2001/XMLSchema'
targetNamespace='urn:xmpp:jingle:transports:s5b:1'
xmlns='urn:xmpp:jingle:transports:s5b:1'
elementFormDefault='qualified'>
<xs:element name='transport'>
<xs:complexType>
<xs:choice>
<xs:element ref='activated'
minOccurs='0' maxOccurs='1'/>
<xs:element ref='candidate'
minOccurs='0' maxOccurs='unbounded'/>
<xs:element name='candidate-error'
minOccurs='0' maxOccurs='1' type='empty'/>
<xs:element ref='candidate-used'
minOccurs='0' maxOccurs='1'/>
<xs:element name='proxy-error'
minOccurs='0' maxOccurs='1' type='empty'/>
</xs:choice>
<xs:attribute name='mode' use='optional' default='tcp'>
<xs:attribute name='sid' type='xs:string' use='optional'/>
<xs:simpleType>
<xs:restriction base='xs:NCName'>
<xs:enumeration value='tcp'/>
<xs:enumeration value='udp'/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
</xs:element>
<xs:element name='candidate'>
<xs:complexType>
<xs:simpleContent>
<xs:extension base='empty'>
<xs:attribute name='cid'
type='xs:string' use='required'/>
<xs:attribute name='host'
type='xs:string' use='required'/>
<xs:attribute name='jid'
type='xs:string' use='required'/>
<xs:attribute name='port'
type='xs:positiveInteger' use='optional'/>
<xs:attribute name='priority'
type='xs:positiveInteger' use='required'/>
<xs:attribute name='type'
use='optional' default='direct'>
<xs:simpleType>
<xs:restriction base='xs:NCName'>
<xs:enumeration value='assisted'/>
<xs:enumeration value='direct'/>
<xs:enumeration value='proxy'/>
<xs:enumeration value='tunnel'/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:element name='candidate-used'>
<xs:complexType>
<xs:simpleContent>
<xs:extension base='empty'>
<xs:attribute name='cid' type='xs:string' use='required'/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:element name='activated'>
<xs:complexType>
<xs:simpleContent>
<xs:extension base='empty'>
<xs:attribute name='cid' type='xs:string' use='required'/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
<xs:simpleType name='empty'>
<xs:restriction base='xs:string'>
<xs:enumeration value=''/>
</xs:restriction>
</xs:simpleType>
</xs:schema>
Series: XEP
Number: 0260
Publisher: XMPP Standards Foundation
Status:
Experimental
Type:
Standards Track
Version: 0.5
Last Updated: 2010-04-13
Approving Body: XMPP Council
Dependencies: XMPP Core, XEP-0030, XEP-0065
Supersedes: None
Superseded By: None
Short Name: jingle-s5b
Source Control:
HTML
This document in other formats:
XML
PDF
Email:
stpeter@jabber.org
JabberID:
stpeter@jabber.org
URI:
https://stpeter.im/
Email:
dmeyer@tzi.de
JabberID:
dmeyer@jabber.org
Email:
justin@affinix.com
JabberID:
justin@andbit.net
Email:
ml@update.uu.se
JabberID:
mlundblad@jabber.org
Email:
klaus.hartke@googlemail.com
JabberID:
nx@jabber.org
The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 3920) and XMPP IM (RFC 3921) specifications contributed by the XMPP Standards Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this document has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.
There exists a special venue for discussion related to the technology described in this document: the <jingle@xmpp.org> mailing list.
The primary venue for discussion of XMPP Extension Protocols is the <standards@xmpp.org> discussion list.
Discussion on other xmpp.org discussion lists might also be appropriate; see <http://xmpp.org/about/discuss.shtml> for a complete list.
Errata can be sent to <editor@xmpp.org>.
The following requirements keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".
1. XEP-0166: Jingle <http://xmpp.org/extensions/xep-0166.html>.
2. XEP-0065: SOCKS5 Bytestreams <http://xmpp.org/extensions/xep-0065.html>.
3. XEP-0176: Jingle ICE-UDP Transport Method <http://xmpp.org/extensions/xep-0176.html>.
4. XEP-0047: In-Band Bytestreams <http://xmpp.org/extensions/xep-0047.html>.
5. XEP-0261: Jingle In-Band Bytestreams Transport Method <http://xmpp.org/extensions/xep-0261.html>.
6. XEP-0234: Jingle File Transfer <http://xmpp.org/extensions/xep-0234.html>.
7. XEP-0030: Service Discovery <http://xmpp.org/extensions/xep-0030.html>.
8. XEP-0115: Entity Capabilities <http://xmpp.org/extensions/xep-0115.html>.
9. RFC 6121: Extensible Messaging and Presence Protocol (XMPP): Instant Messaging and Presence <http://tools.ietf.org/html/rfc6121>.
10. Extensible Messaging and Presence Protocol (XMPP) End-to-End Encryption Using Transport Layer Security ("XTLS") <http://tools.ietf.org/html/draft-meyer-xmpp-e2e-encryption>.
11. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols, such as port numbers and URI schemes. For further information, see <http://www.iana.org/>.
12. The XMPP Registrar maintains a list of reserved protocol namespaces as well as registries of parameters used in the context of XMPP extension protocols approved by the XMPP Standards Foundation. For further information, see <http://xmpp.org/registrar/>.
Note: Older versions of this specification might be available at http://xmpp.org/extensions/attic/
Removed 'zeroconf' attribute for consistency with XEP-0065; clarified use of proxy-error condition; corrected schema.
(psa)Added proxy-error action; added a block-size attribute in the transport-accept action when negotiating fallback to another transport, analogous to changes in XEP-0261; editorial review.
(ml/psa)Major update to make Jingle S5B inherit more features from ICE and ICE-TCP. Added priorities and candidate identifiers. Renamed streamhost element to candidate element. Updated candidate selection to use priorities, and it is now required for both clients to send a candidate-used or candidate-error notification. Defined type attribute to differentiate between various kinds of candidates. More clearly described how S5B negotiation is completed, including an activated notification from responder to initiator when the candidate used is a proxy. Noted reuse of fast-mode methodology from S5B optimization specification. Because of incompatibilities with the previous version, changed the namespace to urn:xmpp:jingle:transports:s5b:1.
(dm/kh/psa/jk)Minor changes to track modifications to XEP-0166; updated security considerations for consistency with other transport methods; added section on service discovery.
(psa)Initial published version.
(psa)Clarified order of events to be consistent with raw-udp and ice-udp.
(psa)Specified that the responder can send <streamhost/> candidates, consistent with the earlier S5B optimization extension; this change required the introduction of streamhost-used and streamhost-error. Also added text to encourage the use of NAT-assisting protocols.
(dm/jk)Rough draft.
(psa)END