RFC 6120 [1] and Extensible SASL Profile (XEP-0388) [2] define a way to negotiate SASL mechanisms. When used together with SCRAM mechanisms (RFC 5802 [3]) and channel-binding (SASL Channel-Binding Type Capability (XEP-0440) [4]) the mechanism selection is protected against downgrade attacks by an active MITM tampering with the TLS channel and advertised SASL mechanisms, while the negotiation of the channel-binding types is still not protected against such downgrade attacks.
SASL Channel-Binding Type Capability (XEP-0440) [4] tries to mitigate this by making the "tls-server-end-point" (RFC 5929 [5]) channel-binding mandatory to implement for servers. But that leaves clients not able to implement this type, or any channel-binding at all, vulnerable to downgrades of channel-binding types and SASL mechanisms. Furthermore "tls-server-end-point" provides weaker security guarantees than other channel-bindings like for example "tls-exporter" (defined in RFC 5705 [6] and RFC 9266 [7]).
This specification aims to solve this issue by spcifying a downgrade protection for both SASL mechanisms and channel-binding types using an optional SCRAM attribute (see RFC 5802 [3]). This specification can be used for SASL1 (RFC 6120 [1]) and SASL2 (Extensible SASL Profile (XEP-0388) [2]) profiles as well as any other SASL profile.
Note: In the long term the author strives to publish this as an RFC rather than a XEP to also make this protection available to other protocols, after gaining implementation experience.
This specification uses some abbreviations:
This protocol was designed with the following requirements in mind:
Note that this specification intentionally leaves out support for SASL PLAIN. If server and client support PLAIN, no protection against SASL method or channel-binding downgrades is possible and the security relies solely on the underlying TLS channel. As explained in § 13.8.3 of RFC 6120 [1], servers and clients SHOULD NOT support SASL PLAIN unless it is required by the authentication backend.
A compromise might be to use pinning not for concrete SASL mechanisms, but instead pin that something better than SASL PLAIN was previously supported. Thus pinning will ensure that authentication won't fall back to SASL-PLAIN in the future, but also won't hinder protocol agility for the SCRAM family of SASL mechanisms etc..
Scenario: Bob connects to Alice's XMPP server using a client of his choice supporting SCRAM and channel-binding, Eve wants to MITM this connection. Neither Alice's server nor Bob's client support SASL PLAIN, but only the SCRAM family of SASL mechanisms.
Prerequisites: Eve, the MITM attacker, managed to either steal the cert+key of Alice's XMPP server or to convince some CA to give out a cert+key for Alice's XMPP domain. Maybe Bob even installed a CA of his employer/school and now gets MITMed by his employer/school.
Given this scenario and prerequisites, Eve now can passively MITM the XMPP connection, but Bob and Alice are using channel-binding and this allows them to detect Eve and abort authentication. This forces Eve to be an active attacker, manipulating the data in the XMPP stream to get rid of the channel-binding. Eve does so by changing the list of server-advertised channel-bindings to only include some (fictional) channel-binding types she is sure the client does not support. Bob's client now has the following choices (see also the Security Considerations of SASL Channel-Binding Type Capability (XEP-0440) [4]):
Case 1 is a successful downgrade from channel-binding to non-channel-binding authentication, Eve "wins".
Case 2 will always fail the authentication if the server supports channel-binding, Eve does not "win". But authentication will fail even if there is no MITM present but server and client simply happen to have no mutually supported channel-binding type.
Case 3 can result in a successful or failed authentication, depending on wether the server supports the type randomly selected by the client. Unfortunately a failed authentication due to selecting the wrong channel-binding type can not be distinguished from a failed authentication because of invalid credentials etc. Thus authentication using some channel-binding type will slow down authentication speed, because the client has to cycle through all channel-binding types it supports until it finds one the server supports (and eventually fall back to no channel-binding, if all channel-binding types have been tried). So, if server and client have mutually supported channel-binding types, Eve won't "win", but authentication will potentially need many roundtrips. If they don't have mutually supported channel-bindig types, Eve wouldn't have had to manipulate the channel-binding list in the first place.
Case 4 does not help on first authentication. This could be neglected, but since channel-binding types aren't that easily ordered by percieved strength and could legitimately change, this could effectively lead to a Denial of Service. For example Alice might want to offload TLS termination because of higher server load and now her server does not support "tls-exporter" anymore but only "tls-server-end-point". A client pinning "tls-exporter" would not be able to connect to Alice's server anymore after the TLS offloading is in place.
Case 5 won't help if Eve managed to steal the cert+key (or the server either somehow does not support the "tls-server-end-point" type).
This specification solves the problems outlined above by adding an optional SCRAM attribute containing the hash of the client-perceived list of channel-binding types that can be checked by the server and will be cryptographically signed by the authentication password used for SCRAM.
Scenario: Bob connects to Alice's XMPP server using a client of his choice supporting SCRAM but no channel-binding, Eve wants to MITM this connection. Neither Alice's server nor Bob's client support SASL PLAIN, but only the SCRAM family of SASL mechanisms. Eve wants to downgrade the used SCRAM mechanism to something weak that she is able to break in X hours/days (For example some time in the future SCRAM-SHA-1 might be broken that way and the underlying password could be recovered investing X hours/days of computing time. But SCRAM-SHA-1 might still be supported by servers for backwards compatibility with older clients only supporting SCRAM-SHA-1 but not SCRAM-SHA-256 etc.).
Prerequisites: Eve, the MITM attacker, managed to either steal the cert+key of Alice's XMPP server or to convince some CA to give out a cert+key for Alice's XMPP domain. Maybe Bob even installed a CA of his employer/school and now gets MITMed by his employer/school.
Given this scenario and prerequisites, Eve now can passively MITM the XMPP connection, but if Eve wants to actively downgrade the SASL mechanism used by Bob, he has to actively change the server-advertised SASL mechanism list. In this scenario Eve actively removes all SCRAM mechanisms but SCRAM-SHA-1 from the server-advertised list to force Bob's client to use SCRAM-SHA-1. Neither Alice nor Bob would detect that.
Pinning of SASL mechanisms could be used for that, but in doing this, Alice would loose some flexibility. She might have briefly activated SCRAM-SHA-512 and deactivated it again. Now Bob's client can not authenticate using SCRAM-SHA-512 anymore and authentication will always fail, if pinning is used. Pinning won't help on first connection either. See above for a pinning + SSDP compromise when still supporting SASL PLAIN.
This specification solves this problem by adding an optional SCRAM attribute containing the hash of the client-perceived SASL mechanism list that can be checked by the server and will be cryptographically signed by the authentication password used for SCRAM.
Sections 5.1 and 7 of RFC 5802 [3] allow for arbitrary optional attributes inside SCRAM messages. This specification uses those optional attribute to implement a downgrade protection.
The server uses the optional attribute "d" with the value "ssdp" in its server-first-message to indicate support for this specification.
A client supporting this specification but not seeing this attribute advertised by the server MAY abort the authentication. It is RECOMMENDED to wait until the whole SCRAM flow hash been completed to distinguish the case of a server not supporting this specification from a MITM stripping out this optional SCRAM attribute.
If the server indicated support for this spec in the server-first-message and the client supports it, the client calculates a hash for the server-advertised list of SASL mechanisms and channel-binding types as follows.
Note: All sorting operations MUST be performed using "i;octet" collation as specified in Section 9.3 of RFC 4790 [9].
The client then adds the optional attribute "d" with the base64 encoded hash obtained in step 5 to its client-final-message. The client MAY send this attribute even if the server did not advertise support.
Note: If the server simultaneously advertises SASL1 and SASL2, only the mechanism list of the SASL protocol the client uses for authentication MUST be considered for hashing.
Upon receiving the client-final-message the server calculates its own base64 encoded hash using the list of SASL mechanisms and channel-binding types it advertised using SASL1 or SASL2 and SASL Channel-Binding Type Capability (XEP-0440) [4] by applying the same algorithm as defined in Client Sends Downgrade Protection Hash.
The server then extracts the base64 encoded hash presented by the client in the optional attribute "d" and compares it to its own hash. If the hashes match, the list of SASL mechanisms and channel-binding types has not been changed by an active MITM.
If the hashes do not match, the server MUST fail the authentication as specified in RFC 6120 [1] section 6.5 or Extensible SASL Profile (XEP-0388) [2] section 2.6.2 using the "aborted" error-condition. If Extensible SASL Profile (XEP-0388) [2] is used, the application-specific error-condition "downgrade-detected" in the namespace "urn:xmpp:ssdp:0" MUST be added, too. It MAY further include an optional descriptive text to further clarify this error as specified in Extensible SASL Profile (XEP-0388) [2] section 6.2.6 or RFC 6120 [1] section 6.5. If additional SCRAM data is provided, the used SCRAM "server-error-value" MUST be "downgrade-detected".
Non-XMPP implementations MAY use a SCRAM "server-error-value" of "downgrade-detected" alongside any protocol specific error-condition.
This sections contains an example based on the ones provided in Extensible SASL Profile (XEP-0388) [2].
<!--
Client sending stream header
-->
<stream:stream
from='user@example.org'
to='example.org'
version='1.0'
xml:lang='en'
xmlns='jabber:client'
xmlns:stream='http://etherx.jabber.org/streams'>
<!--
Server responding with stream header and features
-->
<stream:stream
from='example.org'
id='++TR84Sm6A3hnt3Q065SnAbbk3Y='
to='user@example.org'
version='1.0'
xml:lang='en'
xmlns='jabber:client'
xmlns:stream='http://etherx.jabber.org/streams'>
<stream:features>
<authentication xmlns='urn:xmpp:sasl:2'>
<mechanism>SCRAM-SHA-1</mechanism>
<mechanism>SCRAM-SHA-1-PLUS</mechanism>
<inline xmlns='urn:xmpp:sasl:2'>
<!-- Server indicates that XEP-0198 can be negotiated "inline" -->
<enable xmlns='urn:xmpp:sm:3'/>
<!-- Server indicates support for XEP-0386 Bind 2 -->
<bind xmlns='urn:xmpp:bind2:1'/>
</inline>
</authentication>
<!-- Channel-binding information provided by XEP-0440 -->
<sasl-channel-binding xmlns='urn:xmpp:sasl-cb:0'>
<channel-binding type='tls-server-end-point'/>
<channel-binding type='tls-exporter'/>
</sasl-channel-binding>
</stream:features>
<!--
Client initiates authentication using SCRAM-SHA-1-PLUS and channel-binding type "tls-exporter"
-->
<authenticate xmlns='urn:xmpp:sasl:2' mechanism='SCRAM-SHA-1-PLUS'>
<!-- Base64 of: 'p=tls-exporter,,n=user,r=12C4CD5C-E38E-4A98-8F6D-15C38F51CCC6' -->
<initial-response>cD10bHMtZXhwb3J0ZXIsLG49dXNlcixyPTEyQzRDRDVDLUUzOEUtNEE5OC04RjZELTE1QzM4RjUxQ0NDNg==</initial-response>
<user-agent id='d4565fa7-4d72-4749-b3d3-740edbf87770'>
<software>AwesomeXMPP</software>
<device>Kiva's Phone</device>
</user-agent>
</authenticate>
<!--
SCRAM-SHA-1-PLUS challenge issued by the server as defined in RFC 5802
but including the optional attribute indicating support for this specification.
Base64 of: 'r=12C4CD5C-E38E-4A98-8F6D-15C38F51CCC6a09117a6-ac50-4f2f-93f1-93799c2bddf6,s=QSXCR+Q6sek8bf92,i=4096,d=ssdp'
-->
<challenge xmlns='urn:xmpp:sasl:2'>
cj0xMkM0Q0Q1Qy1FMzhFLTRBOTgtOEY2RC0xNUMzOEY1MUNDQzZhMDkxMTdhNi1hYzUwLTRmMmYtOTNmMS05Mzc5OWMyYmRkZjYscz1RU1hDUitRNnNlazhiZjkyLGk9NDA5NixkPXNzZHA=
</challenge>
<!--
The client responds with the base64 encoded SCRAM-SHA-1-PLUS client-final-message (password: 'pencil')
including the base64 encoded SHA-1 hash of the mechanism and channel-binding lists.
Attribute "d" contains base64 encoded SHA-1 hash of 'SCRAM-SHA-1,SCRAM-SHA-1-PLUS|tls-exporter,tls-server-end-point'
Base64 of: 'c=cD10bHMtZXhwb3J0ZXIsLMcoQvOdBDePd4OswlmAWV3dg1a1Wh1tYPTBwVid10VU,r=12C4CD5C-E38E-4A98-8F6D-15C38F51CCC6a09117a6-ac50-4f2f-93f1-93799c2bddf6,p=UApo7xo6Pa9J+Vaejfz/dG7BomU=,d=dRc3RenuSY9ypgPpERowoaySQZY='
The c-attribute contains the GS2-header and channel-binding data blob (32 bytes) as defined in RFC 5802.
-->
<response xmlns='urn:xmpp:sasl:2'>
Yz1jRDEwYkhNdFpYaHdiM0owWlhJc0xNY29Rdk9kQkRlUGQ0T3N3bG1BV1YzZGcxYTFXaDF0WVBUQndWaWQxMFZVLHI9MTJDNENENUMtRTM4RS00QTk4LThGNkQtMTVDMzhGNTFDQ0M2YTA5MTE3YTYtYWM1MC00ZjJmLTkzZjEtOTM3OTljMmJkZGY2LHA9VUFwbzd4bzZQYTlKK1ZhZWpmei9kRzdCb21VPSxkPWRSYzNSZW51U1k5eXBnUHBFUm93b2F5U1FaWT0=
</response>
<!--
The server accepted this authentication, no tampering with the advertised SASL mechanisms or channel-bindings was detected.
-->
<success xmlns='urn:xmpp:sasl:2'>
<!-- Base64 of: 'v=sQq8A1dePL5DxWX22Sz4TJMD7t4=' -->
<additional-data>
dj1zUXE4QTFkZVBMNUR4V1gyMlN6NFRKTUQ3dDQ9
</additional-data>
<authorization-identifier>user@example.org</authorization-identifier>
</success>Using SCRAM attributes makes them part of the HMAC signatures used in the SCRAM protocol flow efficiently protecting them against any MITM attacker not knowing the password used.
This protocol shall be superseded by any IETF RFC providing some or all of the functionality provided by this specification. If such a specification exists implementations SHOULD NOT implement this XEP and SHOULD implement the superseding RFC.
This document requires no interaction with the Internet Assigned Numbers Authority (IANA) [10].
This specification does not need any interaction with the XMPP Registrar [11].
This specification does not specify any new XML elements.
This document in other formats: XML PDF
This XMPP Extension Protocol is copyright © 1999 – 2020 by the XMPP Standards Foundation (XSF).
Permission is hereby granted, free of charge, to any person obtaining a copy of this specification (the "Specification"), to make use of the Specification without restriction, including without limitation the rights to implement the Specification in a software program, deploy the Specification in a network service, and copy, modify, merge, publish, translate, distribute, sublicense, or sell copies of the Specification, and to permit persons to whom the Specification is furnished to do so, subject to the condition that the foregoing copyright notice and this permission notice shall be included in all copies or substantial portions of the Specification. Unless separate permission is granted, modified works that are redistributed shall not contain misleading information regarding the authors, title, number, or publisher of the Specification, and shall not claim endorsement of the modified works by the authors, any organization or project to which the authors belong, or the XMPP Standards Foundation.
## NOTE WELL: This Specification is provided on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. ##
In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall the XMPP Standards Foundation or any author of this Specification be liable for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising from, out of, or in connection with the Specification or the implementation, deployment, or other use of the Specification (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if the XMPP Standards Foundation or such author has been advised of the possibility of such damages.
This XMPP Extension Protocol has been contributed in full conformance with the XSF's Intellectual Property Rights Policy (a copy of which can be found at <https://xmpp.org/about/xsf/ipr-policy> or obtained by writing to XMPP Standards Foundation, P.O. Box 787, Parker, CO 80134 USA).
The HTML representation (you are looking at) is maintained by the XSF. It is based on the YAML CSS Framework, which is licensed under the terms of the CC-BY-SA 2.0 license.
The Extensible Messaging and Presence Protocol (XMPP) is defined in the XMPP Core (RFC 6120) and XMPP IM (RFC 6121) specifications contributed by the XMPP Standards Foundation to the Internet Standards Process, which is managed by the Internet Engineering Task Force in accordance with RFC 2026. Any protocol defined in this document has been developed outside the Internet Standards Process and is to be understood as an extension to XMPP rather than as an evolution, development, or modification of XMPP itself.
The primary venue for discussion of XMPP Extension Protocols is the <standards@xmpp.org> discussion list.
Discussion on other xmpp.org discussion lists might also be appropriate; see <https://xmpp.org/community/> for a complete list.
Given that this XMPP Extension Protocol normatively references IETF technologies, discussion on the <xsf-ietf@xmpp.org> list might also be appropriate.
Errata can be sent to <editor@xmpp.org>.
The following requirements keywords as used in this document are to be interpreted as described in RFC 2119: "MUST", "SHALL", "REQUIRED"; "MUST NOT", "SHALL NOT"; "SHOULD", "RECOMMENDED"; "SHOULD NOT", "NOT RECOMMENDED"; "MAY", "OPTIONAL".
1. RFC 6120: Extensible Messaging and Presence Protocol (XMPP): Core <http://tools.ietf.org/html/rfc6120>.
2. XEP-0388: Extensible SASL Profile <https://xmpp.org/extensions/xep-0388.html>.
3. RFC 5802: Salted Challenge Response Authentication Mechanism (SCRAM) SASL and GSS-API Mechanisms <http://tools.ietf.org/html/rfc5802>.
4. XEP-0440: SASL Channel-Binding Type Capability <https://xmpp.org/extensions/xep-0440.html>.
5. RFC 5929: Channel Bindings for TLS <http://tools.ietf.org/html/rfc5929>.
6. RFC 5705: Keying Material Exporters for Transport Layer Security (TLS) <http://tools.ietf.org/html/rfc5705>.
7. RFC 9266: Channel Bindings for TLS 1.3 <http://tools.ietf.org/html/rfc9266>.
8. RFC 7677: SCRAM-SHA-256 and SCRAM-SHA-256-PLUS Simple Authentication and Security Layer (SASL) Mechanisms <http://tools.ietf.org/html/rfc7677>.
9. RFC 4790: Internet Application Protocol Collation Registry <http://tools.ietf.org/html/rfc4790>.
10. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols, such as port numbers and URI schemes. For further information, see <http://www.iana.org/>.
11. The XMPP Registrar maintains a list of reserved protocol namespaces as well as registries of parameters used in the context of XMPP extension protocols approved by the XMPP Standards Foundation. For further information, see <https://xmpp.org/registrar/>.
Note: Older versions of this specification might be available at https://xmpp.org/extensions/attic/
@report{molitor2022ssdp,
title = {SASL SCRAM Downgrade Protection},
author = {Molitor, Thilo},
type = {XEP},
number = {0474},
version = {0.2.0},
institution = {XMPP Standards Foundation},
url = {https://xmpp.org/extensions/xep-0474.html},
date = {2022-10-11/2023-01-14},
}END